glweek
Well-known member
Figured id finally post my setup. Mixed reef z's & p's, a few lps and as many sps.
Tank:
-40B drilled with 700gph glass holes kit and 3/4 in return.
-Hard plumbing for return and spa flex for overflow.
Sump:
-20L first baffle at 9", Chaeto in the middle chamber and then bubble trap to return chamber at 8.5" first 1" off the bottom second and 4" third (to prevent the "cascade bubbles" when the water level fluctuates).
Equipment:
-ATO: JBJ with aqua lifter and 7gal container
-Controller: RKL with 2 pc4's, and an sl-1 with ph probe
-Heaters: 100w Jager and 150w Jager (2 incase something happens to one of them)
-Lights: OceanRevive.com It-2060 with optics removed hanging from DIY bracket at 7" from water
-Powerheads: Koralia 1050 & 750 (wp-25 soon to come)
-Reactor: BRS single stage running in-line off of the return pump with gfo on bottom and carbon on top.
-Return: Rio 2500HP
-Skimmer: Seaside Aquatics CS-1
Pics will come at some point! :clap2:
Tank:
-40B drilled with 700gph glass holes kit and 3/4 in return.
-Hard plumbing for return and spa flex for overflow.
Sump:
-20L first baffle at 9", Chaeto in the middle chamber and then bubble trap to return chamber at 8.5" first 1" off the bottom second and 4" third (to prevent the "cascade bubbles" when the water level fluctuates).
Equipment:
-ATO: JBJ with aqua lifter and 7gal container
-Controller: RKL with 2 pc4's, and an sl-1 with ph probe
-Heaters: 100w Jager and 150w Jager (2 incase something happens to one of them)
-Lights: OceanRevive.com It-2060 with optics removed hanging from DIY bracket at 7" from water
-Powerheads: Koralia 1050 & 750 (wp-25 soon to come)
-Reactor: BRS single stage running in-line off of the return pump with gfo on bottom and carbon on top.
-Return: Rio 2500HP
-Skimmer: Seaside Aquatics CS-1
Pics will come at some point! :clap2: