roscoe Well-known member Joined Feb 16, 2007 Messages 3,991 Location tacoma/spannaway Oct 28, 2008 #1 How far apart should I place the baffles on a DYI sump/fuge?
DonW R.I.P. Joined Dec 15, 2003 Messages 8,751 Location Tacoma, WA Oct 28, 2008 #2 Use your hand as a guide, you dont want them to end up so close together that cleaning is a pain. Don
Use your hand as a guide, you dont want them to end up so close together that cleaning is a pain. Don
roscoe Well-known member Joined Feb 16, 2007 Messages 3,991 Location tacoma/spannaway Oct 28, 2008 #3 Thanks for the tip Don!!
mfinn Surgeonfish Joined May 31, 2004 Messages 6,902 Location Olympia, WA Oct 28, 2008 #4 I used some 2x4's as spacers. Held the baffles square to each other and gave 1-1/2" between them.
JPG@CFI Precision Fabricator Joined Dec 2, 2005 Messages 603 Location Issaquah, Wa. USA Oct 28, 2008 #5 Depends on how much water you plan on turning over, and how wide or narrow the sump is. A slow river is deep and wide. Jason
Depends on how much water you plan on turning over, and how wide or narrow the sump is. A slow river is deep and wide. Jason
roscoe Well-known member Joined Feb 16, 2007 Messages 3,991 Location tacoma/spannaway Oct 28, 2008 #6 Well I plan to use a standard 75g tank 48''x18''x20'' tall tank. I plan to put 900 to 1200gph through there on a 135g tank. So.... with that width how far apart should they be?
Well I plan to use a standard 75g tank 48''x18''x20'' tall tank. I plan to put 900 to 1200gph through there on a 135g tank. So.... with that width how far apart should they be?