wanareef
reefer addict
FS Pr Jebao to Apex Adapter Cable
FS Jebao to Apex Adapter Cable, made up several for the local members and a couple no shows , these will reduce the 10v from the Apex unit to 5v to run the WP-40 / 60 pumps and you can have inexpensive PH's
keep your stock controller intact just in case your Apex dies
Got two on my tank with this variation of programming
(not mine)
Variable Speed Pump 1 and 2
WP40_Lt
Set Wave1
If Time 08:00 to 10:59 Then DuskDawn
If Time 11:00 to 14:00 Then Wave1
If Time 14:01 to 20:00 Then DuskDawn
If Time 20:01 to 07:59 Then Night
If Outlet Timer1 = ON Then Lt_Flush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2
If FeedA 000 Then OFF
WP40_Rt
Set Wave1
If Time 08:00 to 11:59 Then DuskDawn
If Time 12:00 to 14:00 Then Wave1
If Time 14:01 to 20:00 Then DuskDawn
If Time 20:01 to 07:59 Then Night
If Outlet Timer1 = ON Then Rt_Flush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2
If FeedA 000 Then OFF
Pump Profiles:
Wave1 (main daylight wave pattern)
Synchronize Enabled
Divide by 10 Enabled
Initial off time (Seconds) 0
On time (Seconds) 7
Off time (Seconds) 4
Minimum intensity 0
Maximum intensity 100
Wave2 (Similar pattern to the above but Sync is disabled which creates abit more chaos)
Synchronize Disabled
Divide by 10 Enabled
Initial off time (Seconds) 0
On time (Seconds) 7
Off time (Seconds) 4
Minimum intensity 0
Maximum intensity 100
Lt_Flush
Synchronize Disabled
Divide by 10 Disabled
Initial off time (Seconds) 0
On time (Seconds) 30
Off time (Seconds) 30
Minimum intensity 0
Maximum intensity 90
Rt_Flush
Synchronize Disabled
Divide by 10 Disabled
Initial off time (Seconds) 30
On time (Seconds) 30
Off time (Seconds) 30
Minimum intensity 0
Maximum intensity 90
DuskDawn (This is a lower flow wave pattern used intermittently during the light hours as well as before and after lights go out)
Synchronize Enabled
Divide by 10 Enabled
Initial off time (Seconds) 0
On time (Seconds) 7
Off time (Seconds) 4
Minimum intensity 0
Maximum intensity 30
Night (Sets a constant 30% flow during light off hours)
Synchronize Disabled
Divide by 10 Disabled
Initial off time (Seconds) 0
On time (Seconds) 10
Off time (Seconds) 15
Minimum intensity 30
Maximum intensity 30
Virtual Outlets
3 timers. The timers are used to create short random periods of different flow during daylight hours.
Timer1 (turns on every 120 minutes for 10 minutes. If timer 2 is on at that time, it should remain off)
OSC 120:00/010:00/000:00 Then ON
If Outlet Timer2 = ON Then OFF
If Time 19:30 to 08:00 Then OFF
If FeedA 000 Then OFF
Timer2 (turns on every 45 minutes for 15 minutes except if timer 3 is on)
OSC 045:00/015:00/000:00 Then ON
If Outlet Timer3 = ON Then OFF
If Time 19:30 to 08:00 Then OFF
If FeedA 000 Then OFF
Timer3 (turn on every 15 minutes for 5 minutes except if timer 1 is on)
OSC 015:00/005:00/000:00 Then ON
If Outlet Timer1 = ON Then OFF
If Time 19:30 to 08:00 Then OFF
If FeedA 000 Then OFF
List Date: 7/20/2014
For more info, click here to view the original listing: FS Pr Jebao to Apex Adapter Cable
--------------------------------------
On Sale For: $40.00 + $2.50 Shipping
--------------------------------------
Mobile friendly version: FS Pr Jebao to Apex Adapter Cable
FS Jebao to Apex Adapter Cable, made up several for the local members and a couple no shows , these will reduce the 10v from the Apex unit to 5v to run the WP-40 / 60 pumps and you can have inexpensive PH's
keep your stock controller intact just in case your Apex dies
Got two on my tank with this variation of programming
(not mine)
Variable Speed Pump 1 and 2
WP40_Lt
Set Wave1
If Time 08:00 to 10:59 Then DuskDawn
If Time 11:00 to 14:00 Then Wave1
If Time 14:01 to 20:00 Then DuskDawn
If Time 20:01 to 07:59 Then Night
If Outlet Timer1 = ON Then Lt_Flush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2
If FeedA 000 Then OFF
WP40_Rt
Set Wave1
If Time 08:00 to 11:59 Then DuskDawn
If Time 12:00 to 14:00 Then Wave1
If Time 14:01 to 20:00 Then DuskDawn
If Time 20:01 to 07:59 Then Night
If Outlet Timer1 = ON Then Rt_Flush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2
If FeedA 000 Then OFF
Pump Profiles:
Wave1 (main daylight wave pattern)
Synchronize Enabled
Divide by 10 Enabled
Initial off time (Seconds) 0
On time (Seconds) 7
Off time (Seconds) 4
Minimum intensity 0
Maximum intensity 100
Wave2 (Similar pattern to the above but Sync is disabled which creates abit more chaos)
Synchronize Disabled
Divide by 10 Enabled
Initial off time (Seconds) 0
On time (Seconds) 7
Off time (Seconds) 4
Minimum intensity 0
Maximum intensity 100
Lt_Flush
Synchronize Disabled
Divide by 10 Disabled
Initial off time (Seconds) 0
On time (Seconds) 30
Off time (Seconds) 30
Minimum intensity 0
Maximum intensity 90
Rt_Flush
Synchronize Disabled
Divide by 10 Disabled
Initial off time (Seconds) 30
On time (Seconds) 30
Off time (Seconds) 30
Minimum intensity 0
Maximum intensity 90
DuskDawn (This is a lower flow wave pattern used intermittently during the light hours as well as before and after lights go out)
Synchronize Enabled
Divide by 10 Enabled
Initial off time (Seconds) 0
On time (Seconds) 7
Off time (Seconds) 4
Minimum intensity 0
Maximum intensity 30
Night (Sets a constant 30% flow during light off hours)
Synchronize Disabled
Divide by 10 Disabled
Initial off time (Seconds) 0
On time (Seconds) 10
Off time (Seconds) 15
Minimum intensity 30
Maximum intensity 30
Virtual Outlets
3 timers. The timers are used to create short random periods of different flow during daylight hours.
Timer1 (turns on every 120 minutes for 10 minutes. If timer 2 is on at that time, it should remain off)
OSC 120:00/010:00/000:00 Then ON
If Outlet Timer2 = ON Then OFF
If Time 19:30 to 08:00 Then OFF
If FeedA 000 Then OFF
Timer2 (turns on every 45 minutes for 15 minutes except if timer 3 is on)
OSC 045:00/015:00/000:00 Then ON
If Outlet Timer3 = ON Then OFF
If Time 19:30 to 08:00 Then OFF
If FeedA 000 Then OFF
Timer3 (turn on every 15 minutes for 5 minutes except if timer 1 is on)
OSC 015:00/005:00/000:00 Then ON
If Outlet Timer1 = ON Then OFF
If Time 19:30 to 08:00 Then OFF
If FeedA 000 Then OFF
List Date: 7/20/2014
For more info, click here to view the original listing: FS Pr Jebao to Apex Adapter Cable
--------------------------------------
On Sale For: $40.00 + $2.50 Shipping
--------------------------------------
Mobile friendly version: FS Pr Jebao to Apex Adapter Cable
Last edited:
