Holding tank(s) 80X16X16

[Saltyfish]

Matt,

Looking at building 3 holding / frag tanks with slots for dividers

Just wondering how thick I have to go and I do not want to go over 4 sheets.

The way I see it I should have six peices of 16X16 (roughly) left over.

With six pieces left over could I use them for a center overflow? Don't want to get too fancy, they are just holding / frag tanks


Thanks

 

[Matt@CFI]

James,

make me some drawings with deminsions, I will quote these as soon as I have the drawings.. (they can be hand drawn or what ever works for you...)

Cheers!

Matt

Matt,

Looking at building 3 holding / frag tanks with slots for dividers

Just wondering how thick I have to go and I do not want to go over 4 sheets.

The way I see it I should have six peices of 16X16 (roughly) left over.

With six pieces left over could I use them for a center overflow? Don't want to get too fancy, they are just holding / frag tanks


Thanks

 

[Saltyfish]

James,

make me some drawings with deminsions, I will quote these as soon as I have the drawings.. (they can be hand drawn or what ever works for you...)

Cheers!

Matt

Hope this works I cannot find my scanner cord..

Side View
80"
................................................................................
|@@@@@@@@@@@@@|0000|@@@@@@@@@@@@@|
|@@@@@@@@@@@@@|0000|@@@@@@@@@@@@@|
|@@@@@@@@@@@@@|0000|@@@@@@@@@@@@@| 16" high
|@@@@@@@@@@@@@|0000|@@@@@@@@@@@@@| 16" Deep
|@@@@@@@@@@@@@|0000|@@@@@@@@@@@@@|
|@@@@@@@@@@@@@|0000|@@@@@@@@@@@@@|
|@@@@@@@@@@@@@|0000|@@@@@@@@@@@@@|
|@@@@@@@@@@@@@|0000|@@@@@@@@@@@@@|
................................................................................

0 = 4" Overflow
Top would just have two holes routed out. One on each side of the overflow box
black back and if you have any left over of the black maybe use it inside the over flows on the front to hide the pipe(s)
of course the overflow is not covered.