Hey paul can you tell us about some of your setup there? It;s always interesting to here about the background stuff people run.
Well the horizontal white thing is my worm keeper, the first picture of it is the newer model. The water is pumped to the left side of the trough, then it passes over the worms and returns to the 5 gallon tank below, on the left.
The suspended 7 gallon blue bucket is the fresh water supply to my tank, the RO is below it and the DI is to the left of it. There is a homemade float switch in the bucket that closes the water valve to the RO when it is full.
The thin black hose coming out near the bottom of the bucket travels over the finished ceiling to the tank in the finished part of the basement and goes to a float valve on the tank.
The clear tube on the right side of the blue bucket i the sight glass so I can tell how much water is in the bucket. It also has an overflow tube which leads to a drain under the floor in the event the float switch fails. (so far in about 15 years, it has never failed)
The half black, half yellow container on the tank is my brine shrimp hatchery which I use every day.
The Acrylic parts on the first picture are skimmers in various stages of completion.
The clear, smaller horizontal container in the last picture is an earlier worm keeper. It was used for years but it is now too small as I have a lot of worms.
The large red container is my whole house vacuum and has nothing to do with the tank
That tank under it is an experimental and local tank with crabs, snails and a burr fish in it.