wrightme43
Well-known member
I have a client who wanted a in wall tank. She bought the tank, before consulting with me. I went to her house, and told the building contractor exactly what I needed. Large doors and 32" up x 24" wide x 50" long free under the tank. They left me 21.5" free up, 12.5" free wide x and 50" long free. I mean they built this thing with double 2"x6" and 2 3/4" sheets of plywood. I told them that everything under the stand needed to be triple coated in marine grade poly. The didnt and told me it didnt need it, it was pressure treated. I said look we need to at least cut out part of this one brace so I can fit the skimmer in. The guy said no it was load bearing, It was the only on that didnt go to sideways 2x6, it wasnt load bearing. I have worked some in construction enough to know. Got all pissed off when I proved it wasnt load bearing, because the nails were the only thing holding it in. If the nails were removed it could just be removed by hand.
The lady keeps complaining that the tank is to noisy. It is sitting on wood that is solid attached to her walls. Any noise that is made is transmitted out into the rooms. It cant go anywhere else. Also she says the noise of flowing water is too loud. It is driving me crazy.
I went up yesterday and removed the whole sump to get a different one, the skimmer, the return pump and moved the heater to the tank, and put ONE JUST FREAKING ONE Tunze pump in the tank to keep it alive untill the new sump comes in. Its not even on a controller just steady state flow. She says it woke her baby up in the middle of the night three times and is just to load. When she goes to a friends house in NewYork they have a tank in the dining room that you cant hear at all. Well no DUH!!!!!!!!!!!!! its in a stand and not attached to the freaking walls of the house. I dont know what to do with her. I am about to tell her to go piss up a rope, I am the only business around here that does what I do. I am changing the return pump to a queit one that will only flow about 400 gallon per hour the sump to a precsion marine bubbless resivoir and the skimmer to the gate valve mod so the water wont flow down a sponge to the make less noise. I plan on emptying the tank, unstacking the live rock, lifting the tank and placing blue board under it, lining the walls with blue board, and putting blue board under the sump, after cutting all the stupid excessive bracing out and rebuilding it. She wants all this done for free. I am not doing it for free. This is really really pissing me off. She wants something that is impossible. I mean if one tunze is to loud, how in the world can I run a skimmer and a return pump?
So do you think I should just tell her to screw off and just give her skimmer and return pump she wants me to just eat, and say see you in court? I can not just give her 2000$ worth of equiptment because she thinks it should be totally silent. Now look I not completly unreasonable, I make quiet fish tanks. You cant hear them hardly at all. But there will always be noise with a tank, if it has enough flow to operate or all of the equiptment is isolated in a seperate room, or if the stand is closed and isolated from the walls of the house. I was a Sonarman on submarines. Part of my job was to make sure all sound was isolated on our ship. I completly understand how sound is transmitted and how to isolate it. Its like she wants me to fix what is impossible to fix.
Oh yeah and this is the best. I have one door at the bottom which is 9"x9" square. and two doors at the top which are huge and stupid, they dont even stinking seal, plus the only access to the pumps is thru a piece of plywood I have to unscrew from the wall of her closet after taking all the baby cloths out and a dresser, and all the boxs of diapers and God only knows what else. It is freaking insane.
I will never never never never never allow any building contrator to build anything near any one of my tanks ever again.
This has been a night mare.
The lady keeps complaining that the tank is to noisy. It is sitting on wood that is solid attached to her walls. Any noise that is made is transmitted out into the rooms. It cant go anywhere else. Also she says the noise of flowing water is too loud. It is driving me crazy.
I went up yesterday and removed the whole sump to get a different one, the skimmer, the return pump and moved the heater to the tank, and put ONE JUST FREAKING ONE Tunze pump in the tank to keep it alive untill the new sump comes in. Its not even on a controller just steady state flow. She says it woke her baby up in the middle of the night three times and is just to load. When she goes to a friends house in NewYork they have a tank in the dining room that you cant hear at all. Well no DUH!!!!!!!!!!!!! its in a stand and not attached to the freaking walls of the house. I dont know what to do with her. I am about to tell her to go piss up a rope, I am the only business around here that does what I do. I am changing the return pump to a queit one that will only flow about 400 gallon per hour the sump to a precsion marine bubbless resivoir and the skimmer to the gate valve mod so the water wont flow down a sponge to the make less noise. I plan on emptying the tank, unstacking the live rock, lifting the tank and placing blue board under it, lining the walls with blue board, and putting blue board under the sump, after cutting all the stupid excessive bracing out and rebuilding it. She wants all this done for free. I am not doing it for free. This is really really pissing me off. She wants something that is impossible. I mean if one tunze is to loud, how in the world can I run a skimmer and a return pump?
So do you think I should just tell her to screw off and just give her skimmer and return pump she wants me to just eat, and say see you in court? I can not just give her 2000$ worth of equiptment because she thinks it should be totally silent. Now look I not completly unreasonable, I make quiet fish tanks. You cant hear them hardly at all. But there will always be noise with a tank, if it has enough flow to operate or all of the equiptment is isolated in a seperate room, or if the stand is closed and isolated from the walls of the house. I was a Sonarman on submarines. Part of my job was to make sure all sound was isolated on our ship. I completly understand how sound is transmitted and how to isolate it. Its like she wants me to fix what is impossible to fix.
Oh yeah and this is the best. I have one door at the bottom which is 9"x9" square. and two doors at the top which are huge and stupid, they dont even stinking seal, plus the only access to the pumps is thru a piece of plywood I have to unscrew from the wall of her closet after taking all the baby cloths out and a dresser, and all the boxs of diapers and God only knows what else. It is freaking insane.
I will never never never never never allow any building contrator to build anything near any one of my tanks ever again.
This has been a night mare.