Plumbing needed for a Hammerhead

[Clownguy]

I have a 150 gal sps tank and have recently gone through two seals on my ampmaster 3000. I have decided to go with the hammerhead to replace the ampmaster. My current plumbing is one 1.5" drain with a dolphin manifold that splits to 6 3/4" outlet(2 seaswirls and 4 bulkheads). I was wondering if I am going to have to replumb for the hammerhead, i am not sure if this will restrict the flow to much or what. Any plumbing suggestions would be appreciated. Also is this going to be to much flow for the 150?

Chris

 

[NaH2O]

Here's a little bump for ya...

 

[Marcusaltec]

I have a Hammerhead running a 5 feet protein skimmer (there's a lot of water running into it) and 3 loc-lines at 7 feet of height and there I have a very good pressure. If you can add at least two more bulkheads I think it would work great.

 

[mattseattle]

Hopefully in almost a year he's found an answer!