Quality bulkheads

[parajack]

I'd be greatful for a couple of online or Seattle area recomendations for BH fitting purchase. I'm going through the bottom of my 320gal display for 2 cl 1 1/2" systems. Needless to say, this must be done correctly with the best available fittings.

Also, when I built my house, I wired for a small hoist located directly above my display location to raise and lower my custom hood. My tank is a 360 deg view display. Does anyone have any ideas where I could locate a small hoist - preferably remote controlled - that would serve this purpose? Wiring will be routed from display stand through a 2" dry bay located in the overflow which is centered in the tank....

 

[Kensn]

As Mojo has pointed out, McClendon's hardware in the Seattle area has nice sch. 80 bulkhead fittings. Check out his plumbing thread to see them.

Here's the link : http://www.reeffrontiers.com/forums/showthread.php?t=8922&pp=10&highlight=plumbing

 

[DonW]

Harbor freight has some inexpensive hoist. We used one for about 5 years to lift engines before it gave up. Just be sure to search hoist not winch, most little winches do not have reverse.

Don