Search results

Reef Aquarium & Tank Building Forum

Help Support Reef Aquarium & Tank Building Forum:

  1. Cwazy Clown

    Cwazy's DIY 16x16x12 Glass tank

    Thanks for your concern Ed, I did not know that could even happen. Fortunately, the glass was cut so unaccurately that the inside dimensions of the tank is actually 15.65" while my acrylic false wall was precisely cut at 15.5" which gives me .15" of play, also I lightly siliconed the falsewall...
  2. Cwazy Clown

    Using colored LEDs for a fuge light?

    Ahahah yeah definitely :P I think your LED array could power my tank if I was running a softy tank! I might have to try the caulerpa mexicana, where did you get yours? I dont think I've ever seen it at a LFS?
  3. Cwazy Clown

    Using colored LEDs for a fuge light?

    LOL holy crap, thats alot of 10mm leds. I think I'll just go with one red 3w. Also, what macros are you running? I put chaeto in my DT and it basically all died. But, I have 0 nitrates, 0 phosphates, I skim heavily, and also run rowaphos.. But the chaeto that I put into an ac20 hasent died...
  4. Cwazy Clown

    Need an Opinion....

    I only recently have seen a tank get over skimmed and have negative effects. So I would say that its not too much.
  5. Cwazy Clown

    dailydriven911's Bathroom ADA 5.5g Rimless Pico

    pics or it didnt happen. :P
  6. Cwazy Clown

    Using colored LEDs for a fuge light?

    Yeah, since my fuge is only.... 2.5"x5" I only want to put one LED right above it to keep the heat down. I'm leaning towards red. I read somewhere that red and blue are the best growing spectrums, but they are also fairly equal in which is best. And since I already have alot of blue, I might...
  7. Cwazy Clown

    Using colored LEDs for a fuge light?

    I don't have access to buy a white LED, so I was wondering would a blue or green or red LED work? And which color should I get? Or if anyone knows any local retail stores that carry 3w white LED's that would be awesome, Vetco only carries the red/blue/green in 3w.
  8. Cwazy Clown

    Lost all my contacts

    Nice to see ya back Sarang!
  9. Cwazy Clown

    What do you think about my current clown situation?

    Now that I'm upgrading my tank from a 7g to a 14g, I'd like to try and get a second clown since the first female died. Heres the situation, About 9 months ago, I got my pair of semi snowflake clowns. about 6 or 7 months later, the female (or more dominating, larger one) died due to some issues...
  10. Cwazy Clown

    Considering DIY 24 CREE LED 3W for 40G Breeder - opinions welcome

    Hi Mike, I wouldn't think that 24 LEDs is overkill, especially if you're only going to run them at 50%. It also depends on what you're planning to put into that tank, whether it be softies, or SPS. 300$ is also alot of money, I'm sure you could get away with 200 if even, especially if you...
  11. Cwazy Clown

    Smallest Reef on RF Thread! 0.5gallon Zoa Tank!

    Finally got a good picture of it
  12. Cwazy Clown

    New 12"x12"x12" sps cube!!

    So this is the final picture of this tank, its also quite a good fts.
  13. Cwazy Clown

    Cwazy's DIY 16x16x12 Glass tank

  14. Cwazy Clown

    Cwazy's DIY 16x16x12 Glass tank

    LOL I like that stand! But you're right, I just have to be careful and not bump into it too hard. I tested for leaks last night, found two and redid the back two edges (thankfully, since It'll be covered by the AIO) and I tested for leaks again a while ago and its now its leak free! I just...
  15. Cwazy Clown

    WHERE have all the avatars gone?

    click settings, then general settings, and then scroll down and check the box 'show avatars' awhile ago that setting got reset.
  16. Cwazy Clown

    Cwazy's DIY 16x16x12 Glass tank

    Thanks guys, this morning I did some touch up work and also just put it on the stand for some giggles :) I'm debating on whether I want to hang my MH lighting..... I've been wanting to do that but haven't had the time to move my current setup.
  17. Cwazy Clown

    Cwazy's DIY 16x16x12 Glass tank

    Alllllrighty, I finally got home today for spring break! I worked on siliconing up the tank, took a long time to tape up since I really wanted nice-ish lines. Here are the pics. It says 24 hour cure on the bottle, but how long should I wait until I actually water test it? Bottom piece taped...
  18. Cwazy Clown

    Cwazy's DIY 16x16x12 Glass tank

    Of course of course, I definitely like the boom of people starting up nano's right now, there seems to be trend going around :) As for anyone whos interested, I'm looking for 60$ for the tank, stand and a poly carb lid
  19. Cwazy Clown

    Cwazy's DIY 16x16x12 Glass tank

    Here it is
  20. Cwazy Clown

    Cwazy's DIY 16x16x12 Glass tank

    I just picked up the glass for this build from Perkins glass in capitol hill. I'm not gonna lie, the edges are pretty terrible. I chose the option of just sanded edges because between the two samples of sanded vs polished, I didn't feel that it was worth the 5cents/" the edges seriously look...
Back
Top