ATO Placement?

[Hunter1998]

Seems like I have searched and searched for this answer and no luck so being a noob I guess I need to ask where do I place it, does it go into the skimmer section or the return section of this sump/fuge? http://afishybusiness.com/FiltersRefugiums/Refugium_Filters_by_ADHI/ADHI_Refugium_Filter_Model_60

 

[Myteemouse]

return section for the float switches and any were in the sump for the dump of water I put mine in the second section of the sump after the skimmer so the skimmer doesn't suck out my kalk ( mine is going through a kalk reactor)

 

[Hunter1998]

My float and water dump is all in the same piece. Am I correct to assume by water dump you meant the fresh water being put back into the sump from the reservoir? sorry I'm trying to learn the lingo.

 

[Myteemouse]

so put in the return pump section.
This is the one that will drop in level when evep occurs
The input from the tank section will always be full when the return pump is on it HAS to dump into the other sections for them to fill...

So the answer is in the return pump area...
BTW no one knows everything right off the get go...
The only way to learn is ask and read..
WELCOME TO REEF FRONTIERS..
Enjoy..
There is a lot of good info on here as there are good smart people very willing to help..