cilyjr
Member
I have been doing a little experiment with some "alternative" ideas of filtration and reef keeping. These idea are based off of Steve Tyree’s ideas in multi-zone aquariums (second post will be an article on Mr. Tyree's theories) the basic idea is that there are naturally occurring zones in the ocean of varying light and current. The semi cryptic or “benthic zone†of Shawn Wilson’s naming, has been my first experiment.
Here you create an area of low filtered light and a reduced flow to promote the growth of filter feeding organisms that most often only get a small percent of space in the reef aquarium (i.e. behind and beneath rock work). The idea is; if these organisms are given a chance to thrive they act as biomechanical filtration. In my ‘fuge this area is created by using egg crate to form a shelf with several legs which hang down into the “Benthic†area. These will act as surface area for the sponges, squirts, and other life to anchor to. Above that a layer of rock rubble is placed. It allows for some flow and detritus to settle into the lower area of the design
On top of this, a layer of macro algae is placed. The nutrient exportation benefits of algae in the aquarium are well known, in our application the algae is our primary light filter. I use chaetomorpha as it grows quickly and is thick. This level should be shallow only a few inches deep. “The other reasons for a shallow (4-6") culture of algae is to optimize lighting and discourage die off. Conventional refugium design allows chaetomorpha to grow into a giant mass, with new growth at the surface where photosynthesis is possible, and older growth pushed deeper where light isn't available. This "old growth" is then allowed to slowly disintegrate and release its' nutrient catch (phosphate, silicate, nitrate, and heavy metals) back into the water column. Another poor practice is to harvest the algae at the top of the mass. This removes the efficient new growth, and leaves the dieing constituents behind.†Shawn Wilson
Overall this experiment has been a success for me. It is easy to see all the fan worms and small sponges growing on the glass. There are several feather dusters in the “Benthic†zone and I find new stuff every time I look.
The part of Mr. Tyree’s multi-zone experiment that I had been missing was the no light very low flow “Cryptic†zone. I have very limited space because 100% of my system must be hidden in the cabinet of my 46gallon display tank. The sump/fuge I have is an AGA 20 long. I chose this because it gave me the most room for the footprint. I have found some creative ways to use the space I have.
Since a large cryptic zone was out of the question for me I began thinking bout ways to employ some of the ideas. My first thought was to remove the top piece of egg crate and place PVC pipe side by side with small gaps to act in a similar manner as the egg crate shelf (I believe this idea to still have some merit) but I decided that 1’ PVC pipe would make the top zone too shallow or would take too much from the benthic zone. I will put this idea on hold for a future sump. My second was for a single 2inch piece of PVC. I was going pump water in using the return on my skimmer. I decided I didn’t like this idea for a few reasons. First being I had a hard time seeing the zone populating well with freshly skimmed water. Second the flow is very fast. Third I didn’t like the idea of using the PVC as once I sealed it I would not be able to look at what is colonizing inside without destroying it; my main purpose for doing all of this is experimentation. While browsing the isles at Lowes I came across this piece in the electrical area (see photo) since it has a removable piece held on with screws (I bought plastic screws to replace the metal ones) it would be easy to open it and see what is colonizing.
My next step was to find a way to allow water to be pushed through; I didn’t want it to be passive. The skimmer was out of the question so I decided to use the return pump. My return has a t valve allowing a portion of water to return to the sump to regulate flow in the display as I am sure many people do. I had not thought of using this at first because I do have UV attached to this line (how am I going to populate anything post UV) but I have not had the UV light plugged in for months. This also makes it the final zone water circulates through in the sump. Although the cryptic zone box is located in the first chamber of my sump, the water is coming from the pump that returns water to the display. I realize that the water makes a second trip through benthic area but I see no harm in that. I next purchased some Live Rock rubble, filled the electrical box with it, and sealed it up.
The rock will give the zone colonization a jumpstart and will be a place for animals to anchor. Now with the rubble sealed in, no light passes through the chamber. I checked by shining a flashlight in one side in a dark room. It is time hook it up. I used vinyl tubing and some barbed fittings. When I hooked it up I decided that the water flow was too strong to combat this I put holes in the tube which I may replace with a valve later. It is up and running
I realize due to the size of the cryptic that any real benefits in water quality will most likely be negligible; I am interested to see what life will colonize there. My plan is to open it every 6 months.
Thanks for reading this. Please feel free to comment or criticize, I welcome both
it has been a month since i have posted this thread in my local club forum and i will be opening the box soon to see if any colonization has begun.
Here you create an area of low filtered light and a reduced flow to promote the growth of filter feeding organisms that most often only get a small percent of space in the reef aquarium (i.e. behind and beneath rock work). The idea is; if these organisms are given a chance to thrive they act as biomechanical filtration. In my ‘fuge this area is created by using egg crate to form a shelf with several legs which hang down into the “Benthic†area. These will act as surface area for the sponges, squirts, and other life to anchor to. Above that a layer of rock rubble is placed. It allows for some flow and detritus to settle into the lower area of the design
On top of this, a layer of macro algae is placed. The nutrient exportation benefits of algae in the aquarium are well known, in our application the algae is our primary light filter. I use chaetomorpha as it grows quickly and is thick. This level should be shallow only a few inches deep. “The other reasons for a shallow (4-6") culture of algae is to optimize lighting and discourage die off. Conventional refugium design allows chaetomorpha to grow into a giant mass, with new growth at the surface where photosynthesis is possible, and older growth pushed deeper where light isn't available. This "old growth" is then allowed to slowly disintegrate and release its' nutrient catch (phosphate, silicate, nitrate, and heavy metals) back into the water column. Another poor practice is to harvest the algae at the top of the mass. This removes the efficient new growth, and leaves the dieing constituents behind.†Shawn Wilson
Overall this experiment has been a success for me. It is easy to see all the fan worms and small sponges growing on the glass. There are several feather dusters in the “Benthic†zone and I find new stuff every time I look.
The part of Mr. Tyree’s multi-zone experiment that I had been missing was the no light very low flow “Cryptic†zone. I have very limited space because 100% of my system must be hidden in the cabinet of my 46gallon display tank. The sump/fuge I have is an AGA 20 long. I chose this because it gave me the most room for the footprint. I have found some creative ways to use the space I have.
Since a large cryptic zone was out of the question for me I began thinking bout ways to employ some of the ideas. My first thought was to remove the top piece of egg crate and place PVC pipe side by side with small gaps to act in a similar manner as the egg crate shelf (I believe this idea to still have some merit) but I decided that 1’ PVC pipe would make the top zone too shallow or would take too much from the benthic zone. I will put this idea on hold for a future sump. My second was for a single 2inch piece of PVC. I was going pump water in using the return on my skimmer. I decided I didn’t like this idea for a few reasons. First being I had a hard time seeing the zone populating well with freshly skimmed water. Second the flow is very fast. Third I didn’t like the idea of using the PVC as once I sealed it I would not be able to look at what is colonizing inside without destroying it; my main purpose for doing all of this is experimentation. While browsing the isles at Lowes I came across this piece in the electrical area (see photo) since it has a removable piece held on with screws (I bought plastic screws to replace the metal ones) it would be easy to open it and see what is colonizing.
My next step was to find a way to allow water to be pushed through; I didn’t want it to be passive. The skimmer was out of the question so I decided to use the return pump. My return has a t valve allowing a portion of water to return to the sump to regulate flow in the display as I am sure many people do. I had not thought of using this at first because I do have UV attached to this line (how am I going to populate anything post UV) but I have not had the UV light plugged in for months. This also makes it the final zone water circulates through in the sump. Although the cryptic zone box is located in the first chamber of my sump, the water is coming from the pump that returns water to the display. I realize that the water makes a second trip through benthic area but I see no harm in that. I next purchased some Live Rock rubble, filled the electrical box with it, and sealed it up.
The rock will give the zone colonization a jumpstart and will be a place for animals to anchor. Now with the rubble sealed in, no light passes through the chamber. I checked by shining a flashlight in one side in a dark room. It is time hook it up. I used vinyl tubing and some barbed fittings. When I hooked it up I decided that the water flow was too strong to combat this I put holes in the tube which I may replace with a valve later. It is up and running
I realize due to the size of the cryptic that any real benefits in water quality will most likely be negligible; I am interested to see what life will colonize there. My plan is to open it every 6 months.
Thanks for reading this. Please feel free to comment or criticize, I welcome both
it has been a month since i have posted this thread in my local club forum and i will be opening the box soon to see if any colonization has begun.