kebber1223
Member
Is it true that if you turn off your metal halide lights for 2 to 3 to maybe 4 days and only leave the actinics on that this will eliminate the red slime algae? I have a 150 gallon Reef setup with within perfect water chemistry:
ph = 8.2 to 8.3
dKH - 10 to 12
Salinity = 1.024 to 1.025
Calcium - 450
Phosphates - 0 ppm
Nitrates - 5 ppm
No nitrites or ammonia
I do not feed that much to the aquarium. My lights are relatively new and bought in late August which consists of 3 Metal Halides at 150 watts each and actinics. The light is mounted on plastic legs above the water surface by maybe 6 to 8 inches. My water temperature is maintained by my chiller and / or heater at 75 to 77 F. Everything is healthy, but I have begun to get red slime algae. Now I did dose for a week or so about 3 weeks ago, Iron supplement.
Any suggestions? I am removing the patches of Red slime algae with a siphon and did add one dose of the Red Slime algae remover. Help please
ph = 8.2 to 8.3
dKH - 10 to 12
Salinity = 1.024 to 1.025
Calcium - 450
Phosphates - 0 ppm
Nitrates - 5 ppm
No nitrites or ammonia
I do not feed that much to the aquarium. My lights are relatively new and bought in late August which consists of 3 Metal Halides at 150 watts each and actinics. The light is mounted on plastic legs above the water surface by maybe 6 to 8 inches. My water temperature is maintained by my chiller and / or heater at 75 to 77 F. Everything is healthy, but I have begun to get red slime algae. Now I did dose for a week or so about 3 weeks ago, Iron supplement.
Any suggestions? I am removing the patches of Red slime algae with a siphon and did add one dose of the Red Slime algae remover. Help please