hammertone reflector sheets

[ccCapt]

I bought 4 2x4 sheets of hammertone reflector material for DIY lumenarcs. Seems like the others who also wanted a sheet backed out, so I have 2 1/2 sheets for sale. I made 3 and used 1 1/2 sheets. Each sheet will make 2 lumenarcs minis.
A full sheet is $45 and the 1/2 sheet is $25. These can't be shipped, so local pick up in the Wilkes-Barre area.

 

[sryder]

those are realy cool. you going to show us how to make them?

 

[ccCapt]

Sure. If you buy the sheet I can trace the outline that needs to be cut out on the sheet. Then just cut it out, bend it and rivet it all together.

 

[Reefbound]

this is going to be a shot in the dark but, here it goes... You still have this stuff???

 

[ccCapt]

Yes, I still have 2 full sheets left, which is enough for 4 reflectors.

 

[Reefbound]

Yes, I still have 2 full sheets left, which is enough for 4 reflectors.

Im intersted in one sheet and Im local. wouldnt be until this friday. If you want pm me your contact info or I can pm you Im here in Kingston....

 

[ccCapt]

Sounds good. You got a PM.

 

[Reefbound]

Sounds good. You got a PM.

Cool, Will you still trace what has to be cut? I went looking for the pattern but every time I came up empty.

 

[ccCapt]

No problem. I still have the blown up template.

 

[Saltyfish]

where did you find this hammertone reflector material sheets?

I would like to try something out.

Thanks

 

[ccCapt]

I got it here.
http://www.specialty-lights.com/reflective-sun-sheets.html

 

[Saltyfish]

Would your reflector be big enough to fit a DE bulb in?

Of course I would have to get the UV Glass from the local shop but I would like bigger reflectors

 

[ccCapt]

The template I used is the exact same size as a Lumenarc Mini. I don't know exactly how wide a DE bulb is with the endcaps, but the top of the reflector is 6" wide. If the total length of the DE bulb with endcaps is 6" or less, it will fit no problem.

 

[Saltyfish]

Dang just under 7 inches!