rainier29
Well-known member
- Joined
- Sep 26, 2005
- Messages
- 114
I have had my fish only tank set up for about 2 months now and have slowly started adding fish. Water prams were all good and cycling was apparently complete. Then fish started dying...I took everything out and put them into "foster care" except one blue damsel. Then I bought 2 more damsels just to help complete the cycling process (just in case it wasn't complete) and two days later they were all dead too. Checked prams again and everything was fine. No ammonia, no nitrates or nitrites. GH and KH were all ok. No copper no phosphates....
I'm totally at a loss. Took water samples to LFS to get a second oppinion and they concured with my results.
The only thing I can think of is that something electrical is leaking current into the tank but I don't feel anything and all of my equipment is pretty new. Is there a way to check for this?
The other question I have is micro bubbles. I've heard that they are bad but don't know why. I do have quite a few of them because of my closed loop system. Could this be causing it?
Any suggestions or input would be appreciated.
I'm totally at a loss. Took water samples to LFS to get a second oppinion and they concured with my results.
The only thing I can think of is that something electrical is leaking current into the tank but I don't feel anything and all of my equipment is pretty new. Is there a way to check for this?
The other question I have is micro bubbles. I've heard that they are bad but don't know why. I do have quite a few of them because of my closed loop system. Could this be causing it?
Any suggestions or input would be appreciated.