mercenary-grunt
Well-known member
ok well just new sump at this point.
new sump. i had to "mod" the divider in the middle to make sure all of the water can get thru. i have two pumps my return is a iwaki 55rlt (in the back). my etss 800 skimmer by AE tech. my skimmer is being ran by a iwaki 40rxlt. i know people don't think that its enough to truly power it. my drain area has enough back pressure that with my gate fully open i have a water line above the connecter for the skimmer cup. the guy that i got the skimmer from said to keep it at the connection. there was to much water going thru the back that the emergency flow cut out in the drain area was being used. causing bubbles in the system. i got the water line just below the emergency flow thru on the drain area.
just to show the back there is a built in fuge in the back. i am not using. i cant have anything that may block a little of the flow or i will start to use the emergency flow again.
i hope im not confusing anyone. btw please forgive the algae on the acrylic, i let it grow while i had sump trouble to aid filtration.
new sump. i had to "mod" the divider in the middle to make sure all of the water can get thru. i have two pumps my return is a iwaki 55rlt (in the back). my etss 800 skimmer by AE tech. my skimmer is being ran by a iwaki 40rxlt. i know people don't think that its enough to truly power it. my drain area has enough back pressure that with my gate fully open i have a water line above the connecter for the skimmer cup. the guy that i got the skimmer from said to keep it at the connection. there was to much water going thru the back that the emergency flow cut out in the drain area was being used. causing bubbles in the system. i got the water line just below the emergency flow thru on the drain area.
just to show the back there is a built in fuge in the back. i am not using. i cant have anything that may block a little of the flow or i will start to use the emergency flow again.
i hope im not confusing anyone. btw please forgive the algae on the acrylic, i let it grow while i had sump trouble to aid filtration.