Hello all...
I wanted to start a thread here to document my new setup...I did the previously unimaginable this time...i planned it , livestock included before water went in... I want to make this with all life inside a biotope type display... Indo-Pacific Backreef/Lagoon
Setup:
1. 120 gallon starfire cube (diy canopy and stand by previous owner)
The plan is for this tank to contain a indopacific lagoon biotope ,plan to let the DSB thrive a bit, with lots of inverts, and several types of seagrass. Due to a rescue...now there is a banded pipe in here...loving the room and pods and occasional mysis-won't eat it all the time...planned originally to wait a while more to add fish...pipes and seahorses is the plan, but pippi will have to go solo for a few more months...
(this is day one, sand settled down nicely)
currently: - need more cleanup crew to take care of hair algae starting to grow
http://forestalsfish.com/pics/Tanks/120cube/lagoon.jpg
Lighting right now is 400 w MH (6600K) and 2 x55 watt actinics
DSB ~5-6 inches deep
tank has central overflow with 2" drain to pvc/flex to 100 gallon rubbermaid sump.
http://forestalsfish.com/pics/Tanks/planning/drain.jpg
2. 100 Gallon sump - 5 inch DSB; currently 115 pounds fiji LR cured now, and chaeto/caulerpa/gracilia for macro growout/harvest. Lighting is 3 175 w MH and 2 72" VHO actinics (one MH overlaps the tank, used for some plants )...I plan to use this tank for frag growouts eventually
skimmer on sump...small finnex...awaiting new bigger one..produces quite a bit.
automatic FW topoff using a float valve and 50 gallon drum filled with RO/DIwater and powerhead hooked to float valve...
water returned from internal diy acrylic box and mag18 (1850 gph) pump with 1" pvc and gate valve to control flow back to 120 cube.
http://forestalsfish.com/pics/Tanks/120cube/planning/overflowreturn.jpg
(note pic not including final 100 g tub)
inside sump is a couple power heads..plus a manifold type thingy to spread flow coming from both tanks...
3. 150 Gallon - 5 inch DSB and 120 pounds of fiji live rock (put in 3 days ago) came in cured from premium aquatics...and looks fantastic.
http://forestalsfish.com/pics/Tanks/120cube/backreef.jpg
Plan for this tank is to house a indo-pacific backreef biotope with a BTA and colony of tomato clowns, a wrasse or two, DSB of 5", some bits of seagrass, my regal blue tang (hippo) and Kole tang...i plan to have some LR but not stuffed full, to give some better options for aquascaping...
sand bed/cleanup crew/LR/ will be only life for several months as with cube tank, to get fully estblished..
tank is located next to cube, perpendicular, so back reef and lagoon are next to each other, but allowing for different stocking options..
closed loop with mag drive pump for 2 lower back bulkheads...currently on hold...trying to fine tune the plumbing
diy overflow to sump
and will use a mag pump within the sump for return/gate valve...the hose i have draining the overflow is not large enough so have to increase it....not as much flow as return to cube...
tunze 6080 in this tank helps the internal flow...
lighting is not purchased yet, but plan one end 400 watt MH , 2 175's with actinics...currently have several pcs and a 48" corallife 2x196 watt
thanks for any input/support
__________________
Peace,
Dan
I wanted to start a thread here to document my new setup...I did the previously unimaginable this time...i planned it , livestock included before water went in... I want to make this with all life inside a biotope type display... Indo-Pacific Backreef/Lagoon
Setup:
1. 120 gallon starfire cube (diy canopy and stand by previous owner)
The plan is for this tank to contain a indopacific lagoon biotope ,plan to let the DSB thrive a bit, with lots of inverts, and several types of seagrass. Due to a rescue...now there is a banded pipe in here...loving the room and pods and occasional mysis-won't eat it all the time...planned originally to wait a while more to add fish...pipes and seahorses is the plan, but pippi will have to go solo for a few more months...
(this is day one, sand settled down nicely)
currently: - need more cleanup crew to take care of hair algae starting to grow
http://forestalsfish.com/pics/Tanks/120cube/lagoon.jpg
Lighting right now is 400 w MH (6600K) and 2 x55 watt actinics
DSB ~5-6 inches deep
tank has central overflow with 2" drain to pvc/flex to 100 gallon rubbermaid sump.
http://forestalsfish.com/pics/Tanks/planning/drain.jpg
2. 100 Gallon sump - 5 inch DSB; currently 115 pounds fiji LR cured now, and chaeto/caulerpa/gracilia for macro growout/harvest. Lighting is 3 175 w MH and 2 72" VHO actinics (one MH overlaps the tank, used for some plants )...I plan to use this tank for frag growouts eventually
skimmer on sump...small finnex...awaiting new bigger one..produces quite a bit.
automatic FW topoff using a float valve and 50 gallon drum filled with RO/DIwater and powerhead hooked to float valve...
water returned from internal diy acrylic box and mag18 (1850 gph) pump with 1" pvc and gate valve to control flow back to 120 cube.
http://forestalsfish.com/pics/Tanks/120cube/planning/overflowreturn.jpg
(note pic not including final 100 g tub)
inside sump is a couple power heads..plus a manifold type thingy to spread flow coming from both tanks...
3. 150 Gallon - 5 inch DSB and 120 pounds of fiji live rock (put in 3 days ago) came in cured from premium aquatics...and looks fantastic.
http://forestalsfish.com/pics/Tanks/120cube/backreef.jpg
Plan for this tank is to house a indo-pacific backreef biotope with a BTA and colony of tomato clowns, a wrasse or two, DSB of 5", some bits of seagrass, my regal blue tang (hippo) and Kole tang...i plan to have some LR but not stuffed full, to give some better options for aquascaping...
sand bed/cleanup crew/LR/ will be only life for several months as with cube tank, to get fully estblished..
tank is located next to cube, perpendicular, so back reef and lagoon are next to each other, but allowing for different stocking options..
closed loop with mag drive pump for 2 lower back bulkheads...currently on hold...trying to fine tune the plumbing
diy overflow to sump
and will use a mag pump within the sump for return/gate valve...the hose i have draining the overflow is not large enough so have to increase it....not as much flow as return to cube...
tunze 6080 in this tank helps the internal flow...
lighting is not purchased yet, but plan one end 400 watt MH , 2 175's with actinics...currently have several pcs and a 48" corallife 2x196 watt
thanks for any input/support
__________________
Peace,
Dan
Last edited: