Ichthys
Well-known member
So I currently have a 90gal tank which will eventually be replaced by my new 150. This weekend I decided to swap out the sumps, I installed the sump/skimmer/return pump that will run the 150 on my 90 because i wanted to check out the skimmer and it wouldn't run in my old sump, (water level issue). The return pump is an Iwaki WMD-40rlxt and it is too noisy. My tank is in the bedroom and the sump and associated equipment is in the garage on the other side of an insulated wall, so you would think I wouldn't be able to hear anything, but the Iwaki can be heard loud and clear. It is not a vibration issue, the pump is just loud.
So I need recommendations for a return pump. approx 1200gph, external, and QUIET. Cost is not so much an issue. If i cant get this quiet enough, then the whole 150 project goes out the window, the wife cant sleep with the noise.
PS. Don't confuse the WMD40 rlxt and the WMD40 rlt the RLXT does 1200gph the RLT only does 750. My pump is older, not sure how old but i would guess 6 or 7 years, I am not sure if that is a factor.
Thanks
So I need recommendations for a return pump. approx 1200gph, external, and QUIET. Cost is not so much an issue. If i cant get this quiet enough, then the whole 150 project goes out the window, the wife cant sleep with the noise.
PS. Don't confuse the WMD40 rlxt and the WMD40 rlt the RLXT does 1200gph the RLT only does 750. My pump is older, not sure how old but i would guess 6 or 7 years, I am not sure if that is a factor.
Thanks