Reef Surgery

Reef Aquarium & Tank Building Forum

Help Support Reef Aquarium & Tank Building Forum:

sumpfinfishe

Active member
Joined
Feb 7, 2005
Messages
31
Location
Surrey, B.C.
Well after talking with Anthony Calfo last weeekend I had come to the conclusion that I needed to tear down the entire reef before my small population of about 8 patches of Hyroid worms started taking over the SPS corals. I also sent Charles Delbeek a second opinion email regarding Hydroids and his reply was the same as Anthony's-Manual removal. Charles also said there are a few variety's of Nudi's that eat hydroids but he said getting the specfic one shipped in would be like finding a needle in a haystack.

I thought it would be best to eradicate them before they got a serious foothold on more area's of my live rock. So at 10am this morning I started a full rip down of my entire reef. I had a spare 15gl (with heater and airstone) which I used to house all my corals and fish, then all the LR went into 5 different buckets depending on size and color. After all the rock was out I then had to cherry pick all the snails and crabs from the sandbed, after that I decided that I was going to reduce my sandbed from 2" down to 1". I used a small tupperware container to then scoop out about 10lbs of LS. Since there was nothing left except 1" of sand and a few more inches of water I decided to give the new sandbed a thorough clean by rinsing it and then quickly sipohoning out the dirty water.

I then began the teedious job of inspecting all the LR piece by piece with a a small screwdriver in hand. Before each piece was placed back into the tank I removed any patches of hydroids, button polyps, and algae. After about 2 hrs of carfully removing these tiny pests I was ready to rebuild the reef. After all the rock was in place, I started to glue new and old corals back onto my live rock, paying close attention to turkey baste any corals that were exposed to the air, as I only had 6" of water in the tank. After everything was glued or fitted back in place it was time to bring up the water level with 3 pails of water before I could begin to add the fish and inverts. I then let everything settle down before making some final adjustments for the night. Here are a few pics of the day, and the paper towel that I used for the nasty's was covered completly by the time I was done :eek:

Moral of this story: never asume anything, a year ago I thought these nasty little worms were just a small variety of feather dusters-if I had only done the research that day :exclaim:

I did however get to aquascape for more flow which allowed me to add a second MX1200, so now my fish can all go whitewater rafting :D

remove.jpg


dayfrom.jpg


5-22-5c.jpg
 
Wow, Rich! That task does not seem enjoyable. Everything looks good in the last photo!
 
Oh man looks like you were a busy boy, lol. I am glad you didnt decide to do that on friday, rofl. New aquascaping looks great though, keep a close eye on those areas in case some come back.


MIke
 
Nikki, yeah in total it was a 10hr day from start to finish, it was either that or order in new rock(next time).

Mike, what happened to ya, I didn't pi$$ you off did I?. I told ya I had to work friday from 2pm-1030pm. I didn't even hear back from you weather you were still heading up or not.
Thanks,I'm pretty happy with the new aquascaping too, I made a lot more caves and arches and the second MJ1200 along with the SQWD return sure makes waves now.
 
No I did go up thier, I sent you a PM, did you not get it??? I ended up trying to go to J&L but they had moved, so I just went and spent 3 hours in the border line up instead, lol


Mike
 
I got a question about removing the hydroids, since I did not go to the last meeting (sound like I should have :( )

I have some on my rocks too. You said you used a screwdriver, did you just pry out chunks of rocks that had hydroids on it? I heard about kalk paste, does that work also?
Also you mentioned removing algae, I am wondering if that works on bryopsis as well since I have a few patches also.

Thanks.
 
Mike, I didn't get the PM otherwise I would have taken you about the LFS's and a few local tanks before work. I thought it was kinda weird that you didn't call or PM. Next time I will make sure I'm free, even if I have to catch an 8hr flew :D

Joyce, kalk paste can work as well as epoxy except they do have a tendency to come back. Anthony and I spoke breifly about them when we were at Mike's house and suggested removal as the best means to get rid of them, I also emailed Charles Delbeek and he responded with the same answer as Anthony's-good old manual removal :evil:
Yes I used a screw driver to remove not just the worms but the surounding areas of the rock too, I may have lost half a pound of rock in the process but I think this method will prove to be the better. You could also perform this task on bryopsis too, however you may need to look at nutrient levels as well.
 

Latest posts

Back
Top