Remora+Mag3 against back of tank

[Aristarchus]

I adjusted the knobs on the bottom of my remora to where my mag 3 inside the tank is about 1/8" away from the tank but it still looks like it could be bumped and end up touching the glass since it just kind of dangles there. I don't have my tank filled up so i haven't turned my mag3 on yet. I was wondering if anyone else has a remedy for this because I don't want the pump touching the glass and causing alot of noise

 

[jetaero]

You could use some styrofoam right in there between the pump, and the glass.

-Josh-

 

[daytonaconnecti]

you can get the surface skimmer box, and the pump fits down inside, like mine, works great....

 

[Aristarchus]

ahh thanks guys, i think i might end up buying the pre skimmer box

 

[The Apprentice]

Remora Pro with Magdrive 3

Hi Kyle I ran a Remora Pro with Mag-drive 3 with no Prefilter box and I had no noise Issues with it, I did how ever get tire of the messes It would make If the collection cup over flowed so I converted mine to a Urchin pro And put it my sump.

I adjusted the knobs on the bottom of my remora to where my mag 3 inside the tank is about 1/8" away from the tank but it still looks like it could be bumped and end up touching the glass since it just kind of dangles there. I don't have my tank filled up so i haven't turned my mag3 on yet. I was wondering if anyone else has a remedy for this because I don't want the pump touching the glass and causing alot of noise