Llarian
Well-known member
Hello all,
I've been posting off and on, but so far nothing reef related since I don't own one yet, so I suppose its time to change that.
First, thanks to mojo and Chuck for the best reef board I've found yet. Most of the other are either way too large to sort through the useful information, or the signal to noise ratio is way too low. I'm thrilled that this one happens to be local. =)
Now, some questions. Most of my planning has been targetting an SPS tank, but due to space limitations in my apartment, I'm going to scrap that for a smaller 50G soft coral tank for now. From what I've read, I should have a much lower flow rate for the soft corals to be happy. I'm looking at something in the neighborhood of 350-400 gph from the sump, and 2 ~250 gph powerheads in-tank for water movement. Does that sound reasonable for soft corals? My inital plan is just 2x96W PC lighting, but I may consider adding some LPS in the future to this tank, which I believe requires more lighting.
Question #2, if I do a bare bottom with a reduced flow rate, am I going to have detritus problems? I assume I'd have to blast off the bottom more often, but lacking a spraybar or any closed loop outlets at the bottom of the tank behind the liverock, I'm concerned that could be an issue.
Question #3, I'm looking at getting a glass tank for this one. I'm reading more and more that external overflows are much more reliable than they used to be (particularly Amiracle and Lifereef), and I prefer the look of glass overall, particularly for longevity. Is putting LR directly on the glass tank bottom going to cause stress problems? Most of the people I see running BB setups are using acrylic, which is stronger.
That should be enough for me to finish planning. I'm looking forward to finally getting to experience the reef adventure myself rather than just drooling over all the amazing setups I've seen posted here.
Thanks,
Dylan
I've been posting off and on, but so far nothing reef related since I don't own one yet, so I suppose its time to change that.
First, thanks to mojo and Chuck for the best reef board I've found yet. Most of the other are either way too large to sort through the useful information, or the signal to noise ratio is way too low. I'm thrilled that this one happens to be local. =)
Now, some questions. Most of my planning has been targetting an SPS tank, but due to space limitations in my apartment, I'm going to scrap that for a smaller 50G soft coral tank for now. From what I've read, I should have a much lower flow rate for the soft corals to be happy. I'm looking at something in the neighborhood of 350-400 gph from the sump, and 2 ~250 gph powerheads in-tank for water movement. Does that sound reasonable for soft corals? My inital plan is just 2x96W PC lighting, but I may consider adding some LPS in the future to this tank, which I believe requires more lighting.
Question #2, if I do a bare bottom with a reduced flow rate, am I going to have detritus problems? I assume I'd have to blast off the bottom more often, but lacking a spraybar or any closed loop outlets at the bottom of the tank behind the liverock, I'm concerned that could be an issue.
Question #3, I'm looking at getting a glass tank for this one. I'm reading more and more that external overflows are much more reliable than they used to be (particularly Amiracle and Lifereef), and I prefer the look of glass overall, particularly for longevity. Is putting LR directly on the glass tank bottom going to cause stress problems? Most of the people I see running BB setups are using acrylic, which is stronger.
That should be enough for me to finish planning. I'm looking forward to finally getting to experience the reef adventure myself rather than just drooling over all the amazing setups I've seen posted here.
Thanks,
Dylan