I have a 29 gal Bio Cube that has been up for 3 yrs. I want to drill the back for bulkheads & add a sump (I don't want to do a HOB) here's my thoughts. Take the 3 fish, 1 shrimp & some rock & put in my Q/T tank. Put the remaining rock & coral in buckets with a heater & powerhead, drain the water level down to an inch or so above the sand so it's easier to move the tank around, then duct tape some plastic to the middle chamber walls to catch any glass shards from drilling(in case your not familiar with a BC, the rear chambers are separate from the sand area so there's not a worry of glass getting in the sand from drilling). Drill for the bulkheads, refill with the water from the Q/T, re aquascape & add critters back. I'd like to take the sand out to drill but I'm afraid that will cause a cycle.
Any thoughts or ideas?
Any thoughts or ideas?