Search results

Reef Aquarium & Tank Building Forum

Help Support Reef Aquarium & Tank Building Forum:

  1. P

    DIY neodymium cleaning magnet

    DO NOT put one of each of those in each of your front pockets!!!:eek:
  2. P

    holes-how big?

    Simply insert the two inch hole saw into the two and a half inch saw and use it as the guide. Go SLOW!!!! With lots of water.
  3. P

    Id please

    Perform a little research here on the sight - I think you'll find several solutions. I haven't dealt with these but have seen things like Flat Worm Exit and nudibranches mentioned several times in the past.
  4. P

    Id please

    Flatworms???
  5. P

    Installing Schedule 80 bulkheads

    Just slip the hole saw blade size that matches the existing hole onto the hole saw bit and then slip on the size that you want. The first acts as the guide as the second enlarges your hole. Pat
  6. P

    Has anyone used this kind of light???

    Fixture is nice and easy to use but the MH ballests are less than desirable. I bought two 36" units for the top of my acrylic 180g and found that although everything worked as promised, that the 10k halide bulb color included was just too yellow for my liking. So I ended up ordering a couple of...
  7. P

    Digitate Hydroids

    Sounds good, let me know when they come in. LarryB, I too would hate to see these starve; so if you want, we can work something out when they're done with mine. I'm sure that if these work, we can find enough people to pass these around for a bit. Later
  8. P

    Any electronics guys on the board?

    Just disconnect the ground from one side of the cable - usually the probe side. Pat
  9. P

    Digitate Hydroids

    This what they are. http://www.advancedaquarist.com/issues/june2003/invert.htm Nasty little critter with really nasty sting.
  10. P

    Digitate Hydroids

    Yeah, I've read about those solutions also but have ruled them out as there are too many to deal with that way. These things spread like wildfire. So far everything but the ricordia have tolerated these things, but I'm tired of watching the mushrooms melt away into nothing. Between the water...
  11. P

    Digitate Hydroids

    Anybody had any luck getting rid of these? I read somewhere about a nudibranch that may help (just can't find where i saw that at). Any ideas as to which one and where to get a few? Thanks in advance, Pat
  12. P

    MH question

    I ordered a new MH set-up off of e-bay a few weeks ago and found that the 10k bulbs that it came with were just a bit to yellow for my taste. So referring to the original ad on e-bay concerning ballast type and then doing some research on RF lighting section - I returned to e-bay and ordered a...
  13. P

    ID on this

    They are flatworms. Search out "flatworms" and you will find the info you need to remove. Anything from "cleaner" animals to some pretty harsh chemicals.
  14. P

    PLEASE HELP!!! Tank crashing slowly!!!!

    Sounds like one of the heaters "died" in the on position. Verify which one or both heaters are warm and immediatly discard. Keep floating some ice and hang in there.
  15. P

    Shipping Methods

    I ordered a couple of frags from a vender in CA a couple weeks back and after a couple of days delay due to "packaging & preparation" for shipping they finally got sent out. A day later, Fed Ex shows up and upon opening, I found out that "packaging & preparation" meant hand crafting the shipping...
Back
Top