lvsuckerfish
g funk
well my wife was out and about one day and came across this 29 gal tank stand and canopy good price she bought it for me as she knows I want 2 pairs of clowns but not all in the same tank. so she knew it was scratched real bad and figured I would polish it out. so I did! I have alot of bulk heads laying around alot of spare equipment. So I just bought 400w ballast and also 3 reflectors for my 240. and I will have t5s on my 100 so I figured one 250 over this little guy. tank is polished holes drilled for returns and over flows I will use a enhiem 1252 or 63 I forgot which one I have. the bigger of them. a extra squid for the return. I wanted to add a Ikawi for a closed loop since I have a spare but decided agaist that plan. so what I know I have for sure as of today is....
1 lumatek ballast
1 spider reflector
1 raduim single end bulb
1 ho t5 with end caps and bulbs 1 10k and 1 super antic
1 return pump which will feed my brs reactor and also my ca reactor and zeo stone reactor
this system will not be ran with a skimmer I am going to try the turf scrubber and see how it works. I have 30 + lbs of live rock no sand in this one as sooner or later it will be attached to the other systems when they are up and running. I will hook up my rkl to this system to monitor all systems.. this tank will be a grow out / clown one of the 3 pairs only tank. but for now it will hold me over. power heads I will either stick with the k3 or get another tunze to add to the 7095 controller. below are some pictures of the tank it is still dirty from the polishing compound all over the place. but it is a rough plumbing fit for now then I will clean the tank and glue all the plumbing on tight. I will use a blue round tube for a sump on this tank and will be my skimmer section once I set up my other tank this tank for now will house sps lps softies all frags I aquire will start in this tank before moving to my main display. (of course after QT)...........
1 lumatek ballast
1 spider reflector
1 raduim single end bulb
1 ho t5 with end caps and bulbs 1 10k and 1 super antic
1 return pump which will feed my brs reactor and also my ca reactor and zeo stone reactor
this system will not be ran with a skimmer I am going to try the turf scrubber and see how it works. I have 30 + lbs of live rock no sand in this one as sooner or later it will be attached to the other systems when they are up and running. I will hook up my rkl to this system to monitor all systems.. this tank will be a grow out / clown one of the 3 pairs only tank. but for now it will hold me over. power heads I will either stick with the k3 or get another tunze to add to the 7095 controller. below are some pictures of the tank it is still dirty from the polishing compound all over the place. but it is a rough plumbing fit for now then I will clean the tank and glue all the plumbing on tight. I will use a blue round tube for a sump on this tank and will be my skimmer section once I set up my other tank this tank for now will house sps lps softies all frags I aquire will start in this tank before moving to my main display. (of course after QT)...........