Extreme line skimmer update

[gotfish]

What about on an swc 200, is it fine to run the pump with the intake facing to 9 o'clock? If I try to cut the hose I probably couldn't get more then an inch out of it without it starting to kink. That's with the pump intake facing toward 6 o'clock.

 

[luke33]

I would still run the pump on the 200 facing down. I always had best luck with the intake down. Just have as little slack as you can in the tubing. And if your running the pw push in the reducer a few mm's. You will get more air that way. And 10" water depth works best with that guy as well.

 

[luke33]

I snapped a couple pics last night. Last 5 days or 50oz

 

[Skimmy]

that's nasty looking!!!

 

[luke33]

Man did my wife get mad when i emptied it tonight.....accross the room she started gagging, then went and got out the febreez. Man i love messing with her.

 

[Skimmy]

you should take that mess straight outside...lol
disturbing it as little as possible along the way...

 

[roscoe]

Luke.... Where should the water level be for the 250c 2s for optimal performance.

 

[dailydriven911]

Hey Sarang according to the first post 10" seems to be the sweet spot...

 

[roscoe]

Hey Sarang according to the first post 10" seems to be the sweet spot...

Thanks Jayson. LOL I knew I read it somewhere. I guess I should of read the whole thread again. Well the cone is in 8'' of water right now and seems to be doing good.

 

[luke33]

Roscoe, it'll do well in 8" but if you throw it in 10" you'll gain a few scfh per pump. And if you push in the reducers and cut the line where its as tight as possible your pry going to get 35-36scfh per pump with the pw's.