if you have any algae issues in your tank then i would'nt dose amino acids. it would accelerate your nusiance algae. if your tank is free from nusiance algae then i would. i dose 2 drops per 130 gallons every other day or every 3rd day and back off from it when i see hints of cynobacteria. when the cynobacteria disappears then i begin dosing again. you kinda wanna gauge dosing by the pigmentation color of your sps. if they become darker then your overdosing. if sps are light in color then i would start dosing again.
i copied this from another forum. hopefully this okay to do
This guide endeavors to assist you with the ever popular SPS coral. This was written by member Shadowramy and it explains specific ideas and strategies in which you can do to affect the color of your corals. This assumes you have a more then basic understanding of water parameters in your tank. Click the read link to start reading about coloring in SPS corals.
In the past I have been asked a lot about coral colorization as well as wanted to satisfy my own curiosity about specific methods to achieving certain colors. Usually I am asked, “How do you get good colors?” Which I then ask, “What specific color are you looking to enhance?” Over the past several months I have really worked on “tweaking” colors and what is needed to get certain colors. I have done my own testing as well as seen a lot of others tanks and what they have done to achieve certain colors. I think I finally have a basic map for those who are interested.
Please note: I am assuming that you meet the minimum suggested standards to keeping SPS; strong lighting, calcium at the appropriate levels, strong skimming and live rock.
YELLOWS
Highly dependent on Nitrate and PO4 levels. Of course all SPS colors are highly dependent on lack of N and P so I wanted to start with probably the easiest color to get, yellow. Yellows are sort of you baseline; yellows will tell you a lot about what is going on in your tank, what is needed and what is overdosed. Nitrate and/or PO4 reduction is most important, either through technical means such as nitrate/phosphate reducers or biologically through DSB, Carbon dosing and/or water changes and fuges. Basically, if you want to do SPS, I would suggest starting with an acropora that is yellow. If you can get it to say yellow for several months, you should be ready for something else.
Greens
Greens would be the next easiest color to tweak. Most green coloration can be achieved through the addition of an Iron Concentrate (Kents is what I use, however Iron is Iron). You must be very careful with Iron because it is also an Algae accelerator; this is why it is so important for you to get your yellows colors first (your N and P will be lowered).
Additionally, I use my yellows as indicators for my greens and blues. You’ll notice a deficiancy if your greens are brown color or they are paling in color. I start off by dosing Iron at about 1 drop per 50 usg twice a week and take note of what happens, color changes, Algae growth, until my yellow acroporas display a green shimmer
Blues and some purples
This is mainly for blues but I have found is can also have an effect on purples. The supplement for this is Potassium Iodide Concentrate or Lugol’s solution, ESV Potassium Iodide Concentrate will also work; don’t just get something that says Potassium because that is a little different. Dosing should be done when blue colors become less intense. Again, using yellow corals as indicators, stop dosing when yellow corals display a green shimmer.it wont be a solid green but a shimmer of a green/yellow).
Please note, a sign of overdosing is a darkening of tissue, when this happens you have added too much iron or too much iron is being added. Another sign of overdosing is Algae growth, stop immediately and possibly do a water change if necessary. Like everything else reef, go slowly.
Purples
Probably one of the hardest coloration of all acroporas from my experience since it is a combination of several variables. First and foremost is water clarity, which means Carbon and/or filter socks. I have also had good result from biological filters such as using cryptic zones, which produce seasquirts, sponges and other filter feeding animals. Zeo Sponge Power, which can be used in any system, feeds sponges. Sponges are great because they can filter a mass amount of water for better water clarity. From what I have noted, increased water clarify will first effect SPS tips but not the complete base. I have seen nana and valida with really nice purple tips but brown/tan/white bases. I have seen the same nana and valida in another’s tanks, which met all other parameters with a full purple from base to tip. Second being lighting. From my observations of my own tank and others, purples seem to love 420-440nm range light spectrum, those found in actinics and 20K halides. Some of the best purples I have seen are in tanks that have 440nm blue actinics (ATI Blue+, Giessman Actinic) or 20K Halides (Radium, XM 20K).Third, supplements such as Iodide and Potassium (see blues and Reds/Pinks). Again, make sure your greens are green and yellows are yellow. Your blue should be bright with depth. Iodide will also help if you have tip burn. These are just my observations through testing and I am sure in the future other factors will be seen and added. Please feel free to comment with your own observations, data is very important to moving forward.
Author: Shadowramy
__________________
