Hey, does anyone have any experience with either Hi-tech or Global aquarium supply external powerheads? I know that mounting can be a pain and championlighting has a bracket, but they don't show a picture. I am in a place where encorporating a closed loop, even with a calfo manifold would be quite difficult. I hate my powerheads, especially the suction cups, and this may be a good solution if they would work okay.
Specifically, my tank is a 170 gal 60Lx22Wx30T tank. I have a 3/4 inch and 1/2 in seaswirl tied into my return for random flow, two seios (820s) and two maxijet 1200s. Not enough flow currently for my sps.
http://www.championlighting.com/home.php?cat=493
http://www.globeaqua.com/swrpump.html
The bonus would be that most of it sits outside the tank, and there are no suction cups and they could basically be placed anywhere around the upper lip of my eurobrace. They are reasonably priced as well....close to a seio actually, but more water movement and lower profile.
Specifically, my tank is a 170 gal 60Lx22Wx30T tank. I have a 3/4 inch and 1/2 in seaswirl tied into my return for random flow, two seios (820s) and two maxijet 1200s. Not enough flow currently for my sps.
http://www.championlighting.com/home.php?cat=493
http://www.globeaqua.com/swrpump.html
The bonus would be that most of it sits outside the tank, and there are no suction cups and they could basically be placed anywhere around the upper lip of my eurobrace. They are reasonably priced as well....close to a seio actually, but more water movement and lower profile.