menace78
Well-known member
I'm setting up a 75g bowfront and need advice on what size bulkheads I need or any tips on a better way to plumb it all.
I made up a little drawing with #'s for the bulkheads so there easy to identify for replies.
I'll be running about 1800gph threw a closed loop threw a manifold built into the sand on the bottom fed threw 2 bulkheads in the back glass since I can't drill the bottom of this tank.
The 2 sump return lines with be seperate, each running about 350gph.
The only part of this that set in stone is the 2 return pumps and the closed loop pump.
I havn't baught any of the bits, bulkheads, pvc, or even the plexi for the overflow.
I have an open canvace to work with.
any help or sugestions would be apreciated.
Thank you,
Casey
I made up a little drawing with #'s for the bulkheads so there easy to identify for replies.
I'll be running about 1800gph threw a closed loop threw a manifold built into the sand on the bottom fed threw 2 bulkheads in the back glass since I can't drill the bottom of this tank.
The 2 sump return lines with be seperate, each running about 350gph.
The only part of this that set in stone is the 2 return pumps and the closed loop pump.
I havn't baught any of the bits, bulkheads, pvc, or even the plexi for the overflow.
I have an open canvace to work with.
any help or sugestions would be apreciated.
Thank you,
Casey