my calcium's been testing 360-380...
Actually CaCO3 depositing organisms can't utilize Ca++ above 360 ppm so anything between that and 420 ppm is just fine. Personally I stick to about 400 ppm. Cuts down on heat precip with pumps and the like.
Another potential problem with running the alk too high is that I believe you are more likely to get precipitation on heat-producing items such as heaters and the insides of pumps.I know that "adequate" KH is between 8-12dKH, but is 13-15dKH too high? and i'm not to cleer on how reef tanks use KH, other than to stabilize PH. Can anyone enlighten me?
no one seems to know how to lower alkalinity w/out lowering calcium also! can anyone help me out?
This is the absolute best solution. Balance your saltmix before you use it and the do a series of water changes. Do not try to chemically alter the alkalinity."dilution is the solution" = water changes, water changes, water changes.
(with fresh, balanced salt mix)
Either the over use of chemicals or the saltmix itself can sometimes be a problem. It would not occur on it's own.What causes high Alk?
Enter your email address to join:
Register today and take advantage of membership benefits.
Enter your email address to join: