Well Mercedes' roommate just moved out and its been a year since we setup our 15g nano tank so we decided to turn the room into an office and setup a new tank in there.
We planned on setting up a 40 breeder but when we went to buy the tank a 50 was sitting right next to it. The 50 has the same foot print as the 40 breeder but gives an additional 2" of Height.
We decided to copy the ADA freshwater aquarium stands, we were both a fan of the simple modern look. Unfortunately I couldn't afford the rimless tank to go along with it.
Specs
Tank: 50g Aqueon, DIY center overflow, 1" Durso drain, 3/4" return.
Ligthing: Current-USA Outer Orbit 2x150w MH, 4x54w T5, 9 white LED, 9 Blue LED.
Sump: Took an old 29g SeaClear added some baffles and built in a small refugium area fed by mini-jet.
Flow: Return - Bought a Mag 7 after I was unsuccessful at tracking down an Ehem 1260 for what I considered a reasonable price.
Additional - I would like to get a Vortech MP40 but I am having a hard time justifying the cost, we may have to settle for Koralias.
Skimmer: Currently using an old unknown skimmer that will hopefully get my by in the short term. It is powered by a Sedra 5000, the body is 6x20 and the neck is 1.5 x 4.
Aquascape: 40lbs Fiji rock from Marco Rocks. 3 bags of CaribSea Tahitian moon black sand on its way.
Controller I will be ordering a ReefKeeper Light system 3 on Monday.
Here are a few pics of the current progress.
Egg Crate installed as a base:
The light fixture was used and came with the stock 10k bulb and a phoenix 14k bulb. I just bought 2 Reeflux 12 bulbs hoping to find a color in between the two in this pic. I read reviews of the bulb after buying it and reports are that the 12k reflux is at least as blue as the Phoenix.
Here is the stand with the doors off and the sump underneath. I doubt I will keep the lights mounted directly to the tank. I will either build a bar that attaches to the stand like the ADA stand or just mount them to the ceiling.
40lbs of Marco Rocks, good variety of sizes from small to over 15"
The rock is very light and porous but may turn out to be difficult to mount frags to.
Shot of my overflow and plumbing.
We planned on setting up a 40 breeder but when we went to buy the tank a 50 was sitting right next to it. The 50 has the same foot print as the 40 breeder but gives an additional 2" of Height.
We decided to copy the ADA freshwater aquarium stands, we were both a fan of the simple modern look. Unfortunately I couldn't afford the rimless tank to go along with it.
Specs
Tank: 50g Aqueon, DIY center overflow, 1" Durso drain, 3/4" return.
Ligthing: Current-USA Outer Orbit 2x150w MH, 4x54w T5, 9 white LED, 9 Blue LED.
Sump: Took an old 29g SeaClear added some baffles and built in a small refugium area fed by mini-jet.
Flow: Return - Bought a Mag 7 after I was unsuccessful at tracking down an Ehem 1260 for what I considered a reasonable price.
Additional - I would like to get a Vortech MP40 but I am having a hard time justifying the cost, we may have to settle for Koralias.
Skimmer: Currently using an old unknown skimmer that will hopefully get my by in the short term. It is powered by a Sedra 5000, the body is 6x20 and the neck is 1.5 x 4.
Aquascape: 40lbs Fiji rock from Marco Rocks. 3 bags of CaribSea Tahitian moon black sand on its way.
Controller I will be ordering a ReefKeeper Light system 3 on Monday.
Here are a few pics of the current progress.
Egg Crate installed as a base:
The light fixture was used and came with the stock 10k bulb and a phoenix 14k bulb. I just bought 2 Reeflux 12 bulbs hoping to find a color in between the two in this pic. I read reviews of the bulb after buying it and reports are that the 12k reflux is at least as blue as the Phoenix.
Here is the stand with the doors off and the sump underneath. I doubt I will keep the lights mounted directly to the tank. I will either build a bar that attaches to the stand like the ADA stand or just mount them to the ceiling.
40lbs of Marco Rocks, good variety of sizes from small to over 15"
The rock is very light and porous but may turn out to be difficult to mount frags to.
Shot of my overflow and plumbing.