Myteemouse
NOTHING
I woke up today to hear a funny sucking noise under my stand.
So I looked into the stand and I see my 29 tanks sump really low on water and the return pump was sucking air.
So I quickly looked in to ATO 5 gallon container to see it was empty. . I look up and down really quick to see 5 gallons of water in the bottom of my stand. And the also looked quickly at the ATO hoses to see if one got knocked out of one of the sumps and the were fine..
So I shook the ATO bucket and the ATO or the 29 started pushing a touch of what water was left in the container and all of a sudden I feel a shower of water dumping on my back and head.. What the heck was going on????
So I quickly unplugged the ATO for the 29. And stood up to see water flooding from the top of my tank..
I opened the hood quickly and grabbed the screen off the top of the overflow and stuck my finger in the top and the water stared dropping in the tank and the overflow started working again..
I believe there was a snail in there. (how I dont know when the screen was on it)
SO I had to grab the shop vac and start to suck water out of the stand and a handful of towels to wipe up the water on the stand and from behind the tank.
I realize the water was around by dual 250w EL ballast.
I still need to take that out and make sure no water got inside it.
On a final note to self
I WILL NEVER AGAIN HAVE ONLY ONE OVERFLOW PIPE IN A TANK!!!
I need to have Matt make me a new tank ASAP so I can have a dual overflow.
So I looked into the stand and I see my 29 tanks sump really low on water and the return pump was sucking air.
So I quickly looked in to ATO 5 gallon container to see it was empty. . I look up and down really quick to see 5 gallons of water in the bottom of my stand. And the also looked quickly at the ATO hoses to see if one got knocked out of one of the sumps and the were fine..
So I shook the ATO bucket and the ATO or the 29 started pushing a touch of what water was left in the container and all of a sudden I feel a shower of water dumping on my back and head.. What the heck was going on????
So I quickly unplugged the ATO for the 29. And stood up to see water flooding from the top of my tank..
I opened the hood quickly and grabbed the screen off the top of the overflow and stuck my finger in the top and the water stared dropping in the tank and the overflow started working again..
I believe there was a snail in there. (how I dont know when the screen was on it)
SO I had to grab the shop vac and start to suck water out of the stand and a handful of towels to wipe up the water on the stand and from behind the tank.
I realize the water was around by dual 250w EL ballast.
I still need to take that out and make sure no water got inside it.
On a final note to self
I WILL NEVER AGAIN HAVE ONLY ONE OVERFLOW PIPE IN A TANK!!!
I need to have Matt make me a new tank ASAP so I can have a dual overflow.