jamiehill
Utini
I recently upgraded my 3 gallon pico that sat on my desk to a 12 gallon Aquapod.
I added 3 fans for a total of 4. Two in the back in the stock spots and 2 in the front on each side of the feeding door. I also moved the 70w halide into the hood of the new tank. So far my temps have been staying around 78. I was having some problems with the ballast tripping and shutting off due to too much heat around the bulb. I played around with the reflector and removed some pieces so the airflow around the bulb is better and I have not had any ballast trips since.
I have a maxijet set up with some PVC at the bottom of the tank acting as a spray bar and also adding extra flow. I picked up a Koralia pump this last weekend, but it is alot bigger than I thought it would be. I am probably going to end up taking it back this weekend.
I still need to put the fan covers on the hood. The big holes in the top look kind of ghetto. I am also looking at one of the Octopus HOB skimmers. Mark was showing me one at Barrier Reef and they look pretty nice.
The goal is to have this be an SPS/LPS dominated tank.
I have a DIY ATO system already built that I have switched over to the new tank from the old one.
So far the inhabitants are:
1 Highfin goby
1 Sexy shrimp
4 snails
1 blue leg hermit
1 small crocea clam
Corals:
Sunset Montipora
red cap
green cap
green candy cane
ricordias
several different zoos
2 types of xenia
GSP
green striped mushrooms
The xenia, mushrooms and GSP are going to be removed once I start to get more SPS in the tank. I also have a frogspawn and hammer frag that I will be bringing in to put in the tank.
I took some pictures of the inside of the hood when I was putting the lights in, but they were not on the camera.
I added 3 fans for a total of 4. Two in the back in the stock spots and 2 in the front on each side of the feeding door. I also moved the 70w halide into the hood of the new tank. So far my temps have been staying around 78. I was having some problems with the ballast tripping and shutting off due to too much heat around the bulb. I played around with the reflector and removed some pieces so the airflow around the bulb is better and I have not had any ballast trips since.
I have a maxijet set up with some PVC at the bottom of the tank acting as a spray bar and also adding extra flow. I picked up a Koralia pump this last weekend, but it is alot bigger than I thought it would be. I am probably going to end up taking it back this weekend.
I still need to put the fan covers on the hood. The big holes in the top look kind of ghetto. I am also looking at one of the Octopus HOB skimmers. Mark was showing me one at Barrier Reef and they look pretty nice.
The goal is to have this be an SPS/LPS dominated tank.
I have a DIY ATO system already built that I have switched over to the new tank from the old one.
So far the inhabitants are:
1 Highfin goby
1 Sexy shrimp
4 snails
1 blue leg hermit
1 small crocea clam
Corals:
Sunset Montipora
red cap
green cap
green candy cane
ricordias
several different zoos
2 types of xenia
GSP
green striped mushrooms
The xenia, mushrooms and GSP are going to be removed once I start to get more SPS in the tank. I also have a frogspawn and hammer frag that I will be bringing in to put in the tank.
I took some pictures of the inside of the hood when I was putting the lights in, but they were not on the camera.