Need help with EVIL BUBBLES!!
So I got my new Current chiller hooked up and running, yeah!! It works great, no more hot tank. I have an Iwaki 30 running it with a 1 1/2" over the top feeding it, down to a 1" at the pump. The chiller is 1/2" so on the output of the pump it goes from 1" to 1/2" through the chiller and back to 3/4" to the tank. I am getting lot's of bubbles in the tank from the output. Any ideas? I was told by the LFS (Kevin) that the pump must be closer to the source (over the top tube). Could I put that behind the tank at the bottom of the over the top tube and run 1/2" flex tube all the way to the chiller?
So I got my new Current chiller hooked up and running, yeah!! It works great, no more hot tank. I have an Iwaki 30 running it with a 1 1/2" over the top feeding it, down to a 1" at the pump. The chiller is 1/2" so on the output of the pump it goes from 1" to 1/2" through the chiller and back to 3/4" to the tank. I am getting lot's of bubbles in the tank from the output. Any ideas? I was told by the LFS (Kevin) that the pump must be closer to the source (over the top tube). Could I put that behind the tank at the bottom of the over the top tube and run 1/2" flex tube all the way to the chiller?
Last edited: