Boomer
Well-known member
Recently we have been worried about reefers using and assuming that the refracts that ever one has been using in this hobby should be off - 1.5 ppt or -.15 % or - .0015 SG. We have been telling people in short to raise the seamix "15 units" higher to = 35 ppt ( to read 36.5), 3.5 ( to read 3.65 and 1.0265 A( to read 1,0280).
Thes tests have been completed on a number BUT the SAME brand refracts. These are the ones on the below imgage. Low and behold, they should read these values on a good lab refract and would need these adjustments but about 95 % of the ones reefers are using are off from the fractory that exact amount we are correcting for :lol:
So it apears that with the these Chinese refracts, zeroed to RO/DI water, that they are right on when tested to a seawater std, when thney should not be. So it it reads 35 ppt, 3.5 % or 1,0265 no adjustment is needed to our suprise. Just use as is
Note: This is only for these reracts !!
RHS-10ATC
Thes tests have been completed on a number BUT the SAME brand refracts. These are the ones on the below imgage. Low and behold, they should read these values on a good lab refract and would need these adjustments but about 95 % of the ones reefers are using are off from the fractory that exact amount we are correcting for :lol:
So it apears that with the these Chinese refracts, zeroed to RO/DI water, that they are right on when tested to a seawater std, when thney should not be. So it it reads 35 ppt, 3.5 % or 1,0265 no adjustment is needed to our suprise. Just use as is
Note: This is only for these reracts !!
RHS-10ATC
Last edited: