The R/C Man
Well-known member
Hey Everyone!
Well I am planning to order a TDS Meter to mount on my RO/DI unit. To get one of these the price is $38 each but buying 10 or more they will be only $22 each. So I need 9 other soles willing to trust me with your cash...
You can check them out here: http://www.freshwatersystems.com/products/index/p1228/1228/None/None
After having a recent experience of replacing my DI filter only to have it needing to be replaced two weeks later is the reason for this purchase. The need to monitor the membrane's TDS output will save money by not having to prematurely replace filters.....
If you would like to jump in please send me a PM.
FEATURES
Displays TDS levels of the feed water and product water with in & out electrode probes.
Highly efficient and accurate due to its advanced microprocessor technology.
Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use.
Dual Range 0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking 'x10' image.)
Factory Calibrated -Recalibration is not necessary.
Comes equipped with John Guest Quick-Connect T-fittings as shown.
Installs quickly and easily.
SPECIFICATIONS
Range: 0-9990 ppm
Accuracy: ±2%
Cable Length: 24.5" (including sensor)
Power source: 2 x 1.5V button cell batteries (included)
Battery life: over 1000 hours of continuous use
Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.)
Weight: 79.4 g (2.8 oz.)
Well I am planning to order a TDS Meter to mount on my RO/DI unit. To get one of these the price is $38 each but buying 10 or more they will be only $22 each. So I need 9 other soles willing to trust me with your cash...
You can check them out here: http://www.freshwatersystems.com/products/index/p1228/1228/None/None
After having a recent experience of replacing my DI filter only to have it needing to be replaced two weeks later is the reason for this purchase. The need to monitor the membrane's TDS output will save money by not having to prematurely replace filters.....
If you would like to jump in please send me a PM.
FEATURES
Displays TDS levels of the feed water and product water with in & out electrode probes.
Highly efficient and accurate due to its advanced microprocessor technology.
Auto-Off function conserves battery power. The unit shuts off automatically after 10 minutes of non-use.
Dual Range 0-9990 ppm (From 0 - 999 ppm the resolution is 1 ppm. From 1000 to 9990 ppm, the resolution is 10 ppm, indicated by a blinking 'x10' image.)
Factory Calibrated -Recalibration is not necessary.
Comes equipped with John Guest Quick-Connect T-fittings as shown.
Installs quickly and easily.
SPECIFICATIONS
Range: 0-9990 ppm
Accuracy: ±2%
Cable Length: 24.5" (including sensor)
Power source: 2 x 1.5V button cell batteries (included)
Battery life: over 1000 hours of continuous use
Size: 7.6 x 2 x 4.7 cm (3 x .8 x 1.9 in.)
Weight: 79.4 g (2.8 oz.)
