the dopest skimmer ever, finally available in usa!

[NeuroDoc]

The 150: 18x16cm = ~7.25x6.5 inches (don't know height)

The 200: 38x24x84cm = ~15x9.5x19 inches

The 250: 38x24x55cm = ~15x9.5x21.75 inches

all were rounded UP to the nearest 1/4". (fyi 1"=2.54cm)

 

[DonW]

If someone can convert the cm to inches I am really serious about trying one of these.

Google it Ed.
Example 50cm =? inches Works with all conversions.

Don

 

[NeuroDoc]

Google it Ed.
Example 50cm =? inches Works with all conversions.

Don

You can also just type "50cm in inches" (a little faster if you're a touch typist).

 

[szidls]

Is there a recomended sump water height with these skimmers?
Scott

 

[NeuroDoc]

Is there a recomended sump water height with these skimmers?
Scott

Above the intake port and below the output port. Anything between them wont matter. Obviously, too low and you suck excess air into the pump; too high and your skimate will just be tank water. That's why some folks have to put their skimmers on stands, their sumps are too deep to keep the water level between these two ports.


Mark, I would assume the output height is adjustable to allow the consistency of the skimate to be adjusted wetter->dryer. Is that correct, it's hard to tell from the pictures?

 

[Skimmy]

from what i understand there is a means of adjusting the internal water level via a screw on the output i believe, or if you look at the smallest model it has an adjustable riser return pipe.

 

[Skimmy]

1350lh

Don

so thats about 350 gph, about the same as a sedra 3500, i wonder if it will suck more air than the sedra, or if they will make bigger models

 

[DonW]

so thats about 350 gph, about the same as a sedra 3500, i wonder if it will suck more air than the sedra, or if they will make bigger models

My understand is there will be a version of the 1250 = 1255NW 1260 =1265NW.

Don