1guydude 300g

[1guydude]

They are all removable. I got more magnets and 3 lil bags of sand.
I can gather stuff just not get it done. That will be it hopefully for lights.
D

 

[1guydude]

Is it bad i dont trust my carpentry skills. Lol
The lights made it last night up there and hopefully still when im home from work. Thinking ill add some brackets.
The racking and warping on the skins in thinking will be an issue. Still need stain and such

I might try and frame the inside with the leftover 1x2"s.
Some wood glue and small scews so they dont go through the wood skin panels.
I might try the magnet on the skin for the hood but thinking ill prob do something else.
D

 

[1guydude]

Ahhhhhh let there b light, equipment, and water. Lol
Hopefully one day ill have a beautiful display tank.
D

 

[mfinn]

I'm sure you mentioned it before, what are you using for a return pump?


never mind I found it.

 

[1guydude]

Well heres pictures of it. Lol
I need something a bit newer.
D

 

[1guydude]

 

[mfinn]

So how many gallons per hour are you going to push through your sump?

 

[1guydude]

2640gph.... lol
D

 

[1guydude]

Skimmer intake and reactor are fed with a maxi jext 1200. 300gph. (Which u kno about)
Closed loop is 6000gph barracuda reeflo

 

[Pepcrylic]

Ahhhhhh let there b light, equipment, and water. Lol
Hopefully one day ill have a beautiful display tank.
D

Your light arrangement scares me D. If one of those 1x2 comes loose or rolls over your going to have a mess. You need something to stiffen up the canopy
Also need to figure something out on how to keep the canopy from falling off the edge of the tank if it gets bumped

 

[1guydude]

Scares me as well. Lol
Gonna get some brackets. Its pretty sturdy. I gave it the shake test.

My screw up actually helped me this time. Since i did the plumbing 1st and it comes up and over. I had to build the hood frame around the plumbing.
Ive bumped it plenty of times. The plumbing holds it up there.
D

 

[1guydude]

Added salt this morning
Still.not up to temp. Need a new heater controller...
For 1 of my finnex 500w oops.

Anyways. Gonna check temp today when home from work and get the old refractometer out.
D

 

[1guydude]

All my plug ins are about taken up on my 1 computer power bar.
So i cant really add the second skimmer yet.
Im in need of some dj strips.
Also need a board on the wall for plug in and controllers.
Got a long magnet strip as well i think in the garage ill hang my tweezers and metal stuff on.
D

 

[Pepcrylic]

All my plug ins are about taken up on my 1 computer power bar.
So i cant really add the second skimmer yet.
Im in need of some dj strips.
Also need a board on the wall for plug in and controllers.
Got a long magnet strip as well i think in the garage ill hang my tweezers and metal stuff on.
D

I got a couple of Amer. DJ strips, 4 plugs each. Sell to ya cheap 2 for $30

 

[1guydude]

Id like something with 6-10plug ins peppie.... why did u get the small 1s?!
-d

 

[1guydude]

 

[1guydude]

Got my ato container today. 18g
Making my 1st top off water now for the tank.
D

 

[1guydude]

^lol yes my feet r in the pic

 

[Pepcrylic]

For a second I thought that was your new sump! LOL
The 4 bangers were for some earlier smaller tanks.

 

[1guydude]