bkenn77
Member
I visited the local plastic store today to buy some weld-on and I noticed that they had sheets of acrylic stacked high. So the wheels started turning in my head. I would like a bigger tank but can't spend a lot of money, what if I was to build my own. I'm thinking 6ft-2ft-2ft - 180g. The store quoted about $500 for the plastic. I realize the welds must be waterproof (180g on the floor is not good . I told the guy at the store what I was going to use it for and he said the edges would have to be run through a joiner as the joint must be perfect. As in water tight. So my question is how hard is this to do? After reading the posts on this sight I know there are a lot of people with the inventive (mickeymouse) type spirit. Any feedback on this project would be appreciated. Thx, Brian.