Okay time to do some modding.
I have my lights off currently and no live stock.
Since my Aqua c is being a POS, Ive decided to go with a small swc or something similar and add a 20g sump unless someone replies to my wtb about a bigger container.
Also since i'm going to remove my remora, i have room to redo my fuge to make it bigger and put the pump all the way on the right.
Here goes pics and advice, Always Welcome.
First i was planning on cutting the right drop to my fuge and capping it where the line is marked.
Second I want to cut my left drop which is the one with the ball valve access below and turn to fit in a bulkhead (sump drilled where the x is)
On the other side of the bulkhead i'm planning to extend the pipe to the left side of the sump. I want this to be my only drop for the fuge and sump if possible.
Where the other x is i want a bulkhead to be in place and the sump to drain to the fuge were the left drop previously was next to the safety. Im not sure if i need two drains or not.
Full shot example. Except the tank will be all the way in the back corner.
Skimmer on the left in the corner.