MarineTeng
Reef Padawan
Here's the plan
Tank:
30 custom tank from Handegard (25.5" x 15.75" x 16.5"), homemade by ???? top's a bit uneven but i don't mind
Lighting:
PFO mogul pendant w/ icecap 175w ballast aqualine 13k or hamilton 10k bulb
(in the picture the aqualine 13k is in) self wired with some tips from mattseattle and a converter from him, power cord made from lowes, only thing not included in the picture that was used was a wirecutter/scissors
Fuge/sump:
30 gallon long fuge fed by cs50 overflow
sand bed w/ pleneum and seio 620 which are both in the tank in the tank picture, pleneum still needs to be cut/tested in the tank
Return Pump is undecided/unknown at this point, would like suggestions (just need inexpensive and reliable... doesn't have to be high flow cause i think i'll have enough in the tank)
Skimmer:
i'm too ashamed to put up a picture or not willing to take one, a seaclone 100 old style, will upgrade
Filtration:
More to come, planning on getting some Live Rock one way or another, will edit this later
Other Equipment:
Heater - still choosing among the used heaters in my home
RO/DI unit -
Kent Marine Hi-s 35 gpd unit, hanna tds meter - still getting the calibration fluid
Salt - Oceanic
Stand to be built, will be simple and not terribly appealing yet functional, plan on using 2x4's some plywood and bathroom tiles, still debating on height and where the fuge will be, i kind of want it to the side that way i could put something in it and see it and make it easy to use, the one that's under my other stand is too cramped and is annoying to take out cheato
more to be edited tomorrow, going to bed now
thoughts, suggestions and comments always appreciated
Tank:
30 custom tank from Handegard (25.5" x 15.75" x 16.5"), homemade by ???? top's a bit uneven but i don't mind
Lighting:
PFO mogul pendant w/ icecap 175w ballast aqualine 13k or hamilton 10k bulb
(in the picture the aqualine 13k is in) self wired with some tips from mattseattle and a converter from him, power cord made from lowes, only thing not included in the picture that was used was a wirecutter/scissors
Fuge/sump:
30 gallon long fuge fed by cs50 overflow
sand bed w/ pleneum and seio 620 which are both in the tank in the tank picture, pleneum still needs to be cut/tested in the tank
Return Pump is undecided/unknown at this point, would like suggestions (just need inexpensive and reliable... doesn't have to be high flow cause i think i'll have enough in the tank)
Skimmer:
i'm too ashamed to put up a picture or not willing to take one, a seaclone 100 old style, will upgrade
Filtration:
More to come, planning on getting some Live Rock one way or another, will edit this later
Other Equipment:
Heater - still choosing among the used heaters in my home
RO/DI unit -
Kent Marine Hi-s 35 gpd unit, hanna tds meter - still getting the calibration fluid
Salt - Oceanic
Stand to be built, will be simple and not terribly appealing yet functional, plan on using 2x4's some plywood and bathroom tiles, still debating on height and where the fuge will be, i kind of want it to the side that way i could put something in it and see it and make it easy to use, the one that's under my other stand is too cramped and is annoying to take out cheato
more to be edited tomorrow, going to bed now
thoughts, suggestions and comments always appreciated