DonW
R.I.P.
I decided to give in and allow some plastic back in my shop. The kalk reactor main tube is 8" acrylic x 24" tall. The rodi holding chamber is 4" acrylic x 15" tall.
All the electronics and peri pump will be contained in a 6x6x6 acrylic box below the holding chamber. The stirrer will be mounted on the lid with a stir bar going to the bottom.
Here is the initial schematic. The sump level part may change, but all the timing will remain.
All the electronics and peri pump will be contained in a 6x6x6 acrylic box below the holding chamber. The stirrer will be mounted on the lid with a stir bar going to the bottom.
Here is the initial schematic. The sump level part may change, but all the timing will remain.