My 50

[eww]

McLendons has it Martin

Sent from my DROID RAZR using Tapatalk 2

 

[mfinn]

McLendons has it Martin

Sent from my DROID RAZR using Tapatalk 2

I called the one in Puyallup and they said they did not have it.

 

[eww]

Its back in the lumber department by where they keep the acrylic dowels and such. Its not in with the other glues and adhesives. I have bought it there myself but i would definitely call back and make sure before you made the drive. We have some here at the shop as well but that's a further drive for you but you are welcome.

Sent from my DROID RAZR using Tapatalk 2

 

[mfinn]

someone there someone there was able to find the weld on glue

Thanks

 

[Peppie]

Its back in the lumber department by where they keep the acrylic dowels and such. Its not in with the other glues and adhesives. I have bought it there myself but i would definitely call back and make sure before you made the drive. We have some here at the shop as well but that's a further drive for you but you are welcome.

Sent from my DROID RAZR using Tapatalk 2

That is were I find it at the store in Sumner.
I have a 1/2 tube here (Bonney Lake) you are welcome to.


BTW Some hobby stores will carry #16

 

[mfinn]

I think I'm just going to drive up there first thing in the morning.
Thanks anyway.
This will give me the rest of the day to pull the sump and get it ready

 

[lysahaynes]

Looks awesome. I love the pipe fish!

 

[mfinn]

Looks awesome. I love the pipe fish!

Thank-you.

First time I saw a picture of one I decided I wanted one.
Did a little research, saw that they can do well in a tank, so then I had to wait until one became available.

 

[mfinn]

Well, it took me a while but I managed to find some weldons glue ( Thank-you Eric and peppie ). Have the baffle glued in and drying.
The skimmer is running in a bucket of vinegar.
I'll get it installed tomorrow morning.

 

[mfinn]

I finally got the sump modded and the skimmer going and in the stand.

 

[mfinn]

Wish I could figure out where this hose is suppose to go.
With the fitting on the end of it, it doesn't fit anything on this skimmer.

 

[trido]

Is it an adapter (to hook the hose from the pump to the output riser) to silence the air intake?

 

[mfinn]

Is it an adapter (to hook the hose from the pump to the output riser) to silence the air intake?

No.
There are 3 spots on the skimmer a hose can plug into, and the fitting on the end of the hose in question is alot bigger than all of them.
The one on the venturi is about 1/8", and the one on the silencer and drain on the cup are both 1/4". The fitting on the hose is 1/2".

The skimmer is working great without it.
I will have to get a drain hose for the skimmer cup

 

[Skimmy]

that is the drain hose to the skimmer cup....

 

[mfinn]

that is the drain hose to the skimmer cup....

The fitting does not fit into the drain cup fitting. There is a large difference.

 

[Skimmy]

no, u r doing it wrong...
the cap on one end is to stop the skimmate from coming out the end of the hose, not to attach to the drain nipple.
Bubble Magus

 

[mfinn]

Then I guess that explains why the fitting is plugged lol


Sent from my DROID RAZR using Tapatalk 2

 

[mfinn]

Well, I wasn't happy with the look of the light hanger after it was painted, so I got some new 2" aluminum flat bar and bent it a little different.
I think I'm going with the brushed aluminum look.
Here is the main part.

 

[noworries]

Do you have a picture of it over the tank?

 

[mfinn]

Not yet I'm building it now

Sent from my DROID RAZR using Tapatalk 2