If you need me, 1 pm is fine. I do have saw horses, but no large piece of plywood to make a table. Have a small bench, with the usual tools. Plenty of room for parking in driveway and on street.
March Get together/Workshop
- Thread starter DolphinLVR
- Start date
Help Support Reef Aquarium & Tank Building Forum:
I am sure we can come up with the plywood and I have a 6 foot table I will bring as well
Let me get together with Dave in regards to the Acrylic and we should be all set to go!
user 26995
Well-known member
- Joined
- Mar 31, 2009
- Messages
- 6,452
I have a 4ft folding table I can bring too just in case we need it.
Awesome. It's a date then!
Looks like NWFD offered first!
Other than the tank on the stand the important tools and rock are mobile.
The miter saw (Harbor freight class with a decent blade). I have a plastic table saw blade that might fit. The router table, circular saw, and drill press not pictured.
The rock is boxed up and I have the fiberglass rod and bits but not the courage.
Finally I want to show that my build is making progress and I should have water before April. The sump is basic. The panel on the macro side is glass (less likely to warp), the ATO is the vertical white tube and the return is a modest Amp Master 2300 with 1.5" fittings. Turns out that a single union ball valve is not designed to be removed under pressure with the ball closed (you loose the seal) so I might swap. I have surplus Weldon #4 and #16 from the sump build.
Other than the tank on the stand the important tools and rock are mobile.
The miter saw (Harbor freight class with a decent blade). I have a plastic table saw blade that might fit. The router table, circular saw, and drill press not pictured.
The rock is boxed up and I have the fiberglass rod and bits but not the courage.
Finally I want to show that my build is making progress and I should have water before April. The sump is basic. The panel on the macro side is glass (less likely to warp), the ATO is the vertical white tube and the return is a modest Amp Master 2300 with 1.5" fittings. Turns out that a single union ball valve is not designed to be removed under pressure with the ball closed (you loose the seal) so I might swap. I have surplus Weldon #4 and #16 from the sump build.
Attachments
Also I should also mention, that there wont be any need for any tools as all the pieces to the fish trap will be all cut and ready.
That would be great Lorrie!
Looks like NWFD offered first!
Other than the tank on the stand the important tools and rock are mobile.
The miter saw (Harbor freight class with a decent blade). I have a plastic table saw blade that might fit. The router table, circular saw, and drill press not pictured.
The rock is boxed up and I have the fiberglass rod and bits but not the courage.
Finally I want to show that my build is making progress and I should have water before April. The sump is basic. The panel on the macro side is glass (less likely to warp), the ATO is the vertical white tube and the return is a modest Amp Master 2300 with 1.5" fittings. Turns out that a single union ball valve is not designed to be removed under pressure with the ball closed (you loose the seal) so I might swap. I have surplus Weldon #4 and #16 from the sump build.
Paul - I am sure you will be able to round up a few kind souls to give you a hand lifting the tank and helping to show you how to do the rock work! I personally didnt drill any of my rock, instead I use the cutouts for my tank, drilled holes for the acrylic rods and set the rock work ontop of that
rainydave
Chimp in Space......
Thanks for stepping up NWFD!
Since we're working with glue would you like me to bring a box of nitrile gloves? I have a full box laying around.
Since we're working with glue would you like me to bring a box of nitrile gloves? I have a full box laying around.
No problem. Glad to help. Looking forward to meeting everyone as well.
user 26995
Well-known member
- Joined
- Mar 31, 2009
- Messages
- 6,452
He doesn't know what he has gotten himself into....does he...LOL!!!
N1Husker
RF Staff
What's the address for those of us who don't know?
I will post it up after I an 100% sure we are on for the 17th
tat2z_21
tat2z_21
Is it to late to add one person, myself?
user 26995
Well-known member
- Joined
- Mar 31, 2009
- Messages
- 6,452
Will all the pieces be labeled A,B,C,D.... :rofl:
I will make sure your kit is especially labeled for you :heh:
tat2z_21
tat2z_21
I use this tool for all of my projects. I will try to fit it in my van for the ride down there.
user 26995
Well-known member
- Joined
- Mar 31, 2009
- Messages
- 6,452
LOL LOL Thanks.... I'll need that! LOL
I use this tool for all of my projects. I will try to fit it in my van for the ride down there.
I might need this too if the pieces are not labeled right! LOL!!!!
