bingme
Ribbon worm
any update on the delivery schedule
You still set to receive your tank this friday?
Eric in LFP
You still set to receive your tank this friday?
Eric in LFP
1000 Gallon
- Thread starter BCT182
- Start date
Help Support Reef Aquarium & Tank Building Forum:
I was a little mis-informed. The tank is SHIPPING tomorrow. When it actually shows up is anyones guess.
edwing206
Unregistered Member
DAMN! That's a lot of salt. :lol:
I went ahead and scrapped a few things.
First, I tossed the in-wall idea. It would take time to do it, and even more time to un-do it once we move.
I also scrapped the multi-sump idea. With the massive flow, would come massive bulkheads.
I was able to have a 6ft long, 3ft wide and 2ft tall tank built for less money.
First, I tossed the in-wall idea. It would take time to do it, and even more time to un-do it once we move.
I also scrapped the multi-sump idea. With the massive flow, would come massive bulkheads.
I was able to have a 6ft long, 3ft wide and 2ft tall tank built for less money.
NC2WA
Well-known member
should be impressive for sure.
Luis, for my 375g tank I always have 3-4 buckets on hand at all times. thank god I can store this stuff in the garage or I would hear it from the wife.
Luis, for my 375g tank I always have 3-4 buckets on hand at all times. thank god I can store this stuff in the garage or I would hear it from the wife.
roscoe
Well-known member
Brett did you order that tank from the same place?
edwing206
Unregistered Member
should be impressive for sure.
Luis, for my 375g tank I always have 3-4 buckets on hand at all times. thank god I can store this stuff in the garage or I would hear it from the wife.
I only have 1 bucket at a time. But then again my tank is a 55g plus sump.
When are you moving? Is the tank gonna be only viewable in the garage then?
roscoe
Well-known member
Yeah Brett sounds like you will be spending alot of time in the garage then with out the in wall.
There was a problem with putting the tank in my garage. The garage has a slope, and the slope is greater at one end than the other. Our original idea was to build the stand to accommodate for this. He submitted the design to a structural engineer and that guy said NO WAY. So heres what we ended up with:
3x2" square stock. The top half of the tank will have 3 cross support braces. 8 legs will come down. One in each corner and four evenly spaced in the center. The legs ends are threaded with a bolt attached to a foot with a 6" puck. Each foot will have one of these 6" pucks. Each leg will have a jam nut (like a household appliance) so that the leg can be lengthened or shortened.
this way i can perfectly level the tank, and can again and again if I ever move the tank to another location.
3x2" square stock. The top half of the tank will have 3 cross support braces. 8 legs will come down. One in each corner and four evenly spaced in the center. The legs ends are threaded with a bolt attached to a foot with a 6" puck. Each foot will have one of these 6" pucks. Each leg will have a jam nut (like a household appliance) so that the leg can be lengthened or shortened.
this way i can perfectly level the tank, and can again and again if I ever move the tank to another location.
roscoe
Well-known member
Sweet I had him quote me on that size tank with starfire that you are using as a sump. Man what a great price he has! Can not beat his prices anywhere. Glass cages wanted twice as much as he wanted and the shipping was $1200 big ones with glass cages versus $350 with him.
bingme
Ribbon worm
When the guess gets refined let us know. (Like you wouldn't otherwise)
I strongly urge you to knock a hole in the wall. Even if it is just 4 ft. You have the time now. Just make some calls and frame it in while the tank is on its way. If you are concerned about support, have the stand person weld up a weight bearing frame with vertical bars then install it to look like a shark cage.
Last edited:
NC2WA
Well-known member
Reminds me of waiting for the cable guy to show up.
bingme
Ribbon worm
Reminds me of waiting for the cable guy to show up.
Nice in wall cut out on your 375 tank. Wanna chime in on the lack of a cut out on the garage wall? Seems like a now or never decision with a 1000g tank.
Got any more recent photos to post?
http://www.flickr.com/photos/7329275@N05/422108220/
saltluvers
Member
You're crazy man! I'm jealous! )
)
The Apprentice
Well-known member
Glass Tank
Brett is the tank going to be glass? I have gone through the tread 2 times I can find it? I guess because its so early I haven't had my caffeine yet
Brett is the tank going to be glass? I have gone through the tread 2 times I can find it? I guess because its so early I haven't had my caffeine yet
