Yes, more then likely. I want one for sure. (and more then likely two) The only thing is I don't have time to get my tank and stand (and hence the reflectors) tell next week, at the earliest, as I am out of town for work. I am also trying to figure out how to coordinate with Matt on an overflow box. Ideally I would like to make on trip south and get everything in one swoop.
OCD Reefer's New 50 gallon Tank Thread..
- Thread starter OCDreefer
- Start date
Help Support Reef Aquarium & Tank Building Forum:
seattle989
Well-known member
blue sierra and a red sea aquarium, will drill, there is also Perkins glass
Darthv247
Well-known member
just go buy the bit and a drill ! its not too hard to drill it if your careful and tape both sides. Then you will have the bit for the future. probably cost the same to just buy the bit as it would to have them done. heres a link with a how-to.
http://www.youtube.com/watch?v=CxnugJGiT3o
http://www.youtube.com/watch?v=CxnugJGiT3o
I discovered the answer to the question I posed in this thread.
I filled my tank with water today and tuned the drain and return so there was as little noise as possible. The only noise I hear is water running through the pipes and ball valves between the tank and stand. If the bulkheads lead directly down into the stand my tank would be absolutely silent.
I filled my tank with water today and tuned the drain and return so there was as little noise as possible. The only noise I hear is water running through the pipes and ball valves between the tank and stand. If the bulkheads lead directly down into the stand my tank would be absolutely silent.
I'm picking up the stand, tank and 40 gallon breeder from Saltybell tomorrow! Hopefully if my buddy (aka truck I'm using) has time I'll get the reflector too. However I'm going to have to come back down south for the overflow box.
Next step: figuring out drilling!
Next step: figuring out drilling!
fatboyt123
Well-known member
hey just let me know whewn ever you are down this way tomorrow should be around
saltybell
bio balls
No problem glad you are happy with the stand and hood. Keep us posted on the build.
saltybell
bio balls
looking good. Nice looking overflow also. Keep the pics coming.
Thanks Mike... unfortunately after some fresh water tests and simple calculation I have discovered the overflow can handle around 100gph tops........ lame... I might just use a hand drill and try to widen the slights. I know I could tear it down, any suggestion on how to widen my weir without doing this?
I am booked through Tuesday, if you can't find anyone to help you out sooner let me know and I would be glad to help you out.
Myteemouse
NOTHING
ooo it's gonna get wet.. Cool beans.
Similar threads
